Determine the volume flow rate for this particular water

Reference no: EM13564905

Everyone has experienced using a water fountain that produces a bit too much water pressure. In fact, the drinking fountain on the 3rd floor of Dana Hall at the south end of the hallway shoots a pretty good jet of water. Using a water bottle with a known volume (such as a typical 1-liter Nalgene bottle), a) determine the volume flow rate for this particular water fountain. Make additional physical measurements on the water fountain to estimate: b) the water velocity, and c) the pressure at the exit nozzle.

Reference no: EM13564905

Questions Cloud

Determine the posted speed limit to the nearest 5 mph : A building is located 19 ft from the centerline of the inside lane of a curved section of highway whose radius is 400 ft. The road is level and e = 10. Determine the posted speed limit (to the nearest 5 mph) considering the following conditions:

Determine the improvement in efficiency and circulation rate : Now you want to improve the efficiency and circulation rate. You suggest operaing the cycle utilizing two reversible tubines with saturated vapor exit streams. All conditions remain the same except that the feed to the first turbine is steam at 450 C..

Estimate the flow rate of water required to make the outflow : A mixing chamber has two steady streams and one steady stream. The properties of the first stream is superheated steam at T1 = 400oF, h1 = 1,239 Btu/lbm and flow rate m1 = 20 lbm/h. The second stream is compressed liquid at T2 = 70oF, h2 = 38 Btu/lbm..

Determine the volume flow rate of the steam at the nozzle : A steady-state, well-insulated turbine operates in two stages in series using steam. the first stage has an efficiency of 85% and the second stage 90%. Steam enters the first stage at 400 C and 4 MPa and exits at 1.5 MPa.

Determine the volume flow rate for this particular water : Everyone has experienced using a water fountain that produces a bit too much water pressure. In fact, the drinking fountain on the 3rd floor of Dana Hall at the south end of the hallway shoots a pretty good jet of water

Show this operation on a linear schedule : A project consists of replacing the track on an existing railroad line, involving 3000 feet of track. The old track can be removed at a rate of 70 feet per hour. The old railroad ties can be removed at a rate of 200 feet (measured along the track) pe..

What is the project duration if no activities are to be : A 1500-foot subdivision street is to be constructed. The layout will be completed in three days; the fill will be brought in over the course of eight days; the compaction/grading will be completed in five days

Find the effective angle of shearing resistance of sand : An adiabatic compressor is used to bring saturated water vapor at a pressure of 103 lbf/in^2 up to 1000 lbf/in^2, where the actual exit temperatureis 1000 F. Find the compressor fficiency an the entropy generation. Is there a improvement by reducing ..

Estimate the angle through which the part rotates : A machine part rotates at an angular speed of 0.60 rad/s; itsspeed is then increased to 2.2 rad/s at an angular acceletation of0.70 rad/s2

User Account

All Pages