Determine the vertical force exerted by the balloon

Assignment Help Civil Engineering
Reference no: EM13297091

A ballon is tethered at a height of 16.8 m above the ground by three cables. if the tension in highlighted cable is 60 N , determine the vertical force exerted by the balloon at the base of the balloon basket.

Reference no: EM13297091

Questions Cloud

What is the range of the values that would be expected : a spot speed study was conducted on a freeway on which the mean speed and the standard deviation were found to be 72 .4 mi/hr and 5.4 mi/hr, respectively. what is the range of the values that would be expected to contain the middle 95 percent of s..
Which option should to select to maximize the payout : You are the winner of a sweepstakes and given a choice of a one-time payment of $1,000,000 or a guaranteed $80,000 per year for 20 years. Assume that you will collect all 20 years regardless of health condition.
Determine the differential equation of motion : Determine the differential equation of motion for the damped oscillations and find the time (in term of M) it takes for the system to settle down to oscillations of only 25% of the initial amplitude; (4')
Calculate the density of planet hephaestus : While looking through the Mt. Palomer telescope, you discover a large planetary object orbited by a single moon. calculate the density of Planet Hephaestus
Determine the vertical force exerted by the balloon : A ballon is tethered at a height of 16.8 m above the ground by three cables. if the tension in highlighted cable is 60 N , determine the vertical force exerted by the balloon at the base of the balloon basket.
State what is the final temperature of the iron : a piece of iron with a mass of 350g at 300 C is added to 1.00kg of water at 20 C. what is the final temperature of the iron
Find how much water needs to be added to bring the sand : Given a sand with a moisture content of 10%, how much water needs to be added to bring the sand to a moisture content of 20%
Define what is the final temperature of the iron : A piece of iron with a mass of 350g at 300 C is added to 1.00kg of water at 20 C. what is the final temperature of the iron
What is the additional dollar amount : what is the additional dollar amount he will be required to make assuming he can purchase the new shares from the company at a 5% discount?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the equilibrium concentration of dissolved oxygen

Calculate the equilibrium concentration of dissolved oxygen in 15ºC water at 1atm and again at 2,000m elevation.

  Maximum acceptable tensile service load

Compute the maximum acceptable tensile service load T that may act on a single angle L6x4x3/4 that is welded along only one leg to a gusset plate; thus, there are no holes. The service load is three times the dead load. Solve for a0 A36 steel.

  What is the change in it internal energy

A gas is compressed at a constant pressure of 0.800 atm from 9.00L tp 2.00L. in the process, 400J of energy leave the gas by heat. (a) What is the work done on the gas? (b) What is the change in it internal energy?

  What is the probability that the vehicle pulling out

what is the probability that the vehicle pulling out will get in an accident with oncoming traffic?

  Determine the compression of each spring

The 75 lb block is released from rest 5 ft above the plate. Determine the compression of each spring when the block momentarily comes to rest after striking the plate.

  Design the thinnest possible slab allowed by the aci code

Design a simply supported one-way reinforced concrete floor slab to span 10 ft and carry a service live load of 175 psf and a service dead load of 25 psf. Use fc' = 3000 psi and fy = 60,000 psi. Make the slab thickness to ½-in. increments.

  Value of the kinetic energy correction coefficient

Assuming that the velocity variation within the main channel and the floodplain subsections is much smaller than the change in mean velocities between subsections, find the value of the kinetic energy correction coefficient.

  Composition of the remaining liquid phase

At what temperature does the liquid solidify? What is the composition of this last remaining liquid phase?

  Determine the required value for m

A 1 meter diameter cylindrical mass, M, is connected to a 2 meter wide rectangular gate. The gate is to open when the water level, h, drops below 2.5 meters. Determine the required value for M. Neglect friction at the gate hinge and pulley.

  Find what is the minimum distance from the stalled car

The road is in good condition and is initially dry, but it becomes wet 160 ft before the stalled car (and stays wet until the car is reached). What is the minimum distance from the stalled car at which the driver could apply the brakes and still s..

  Compare and contrast the purpose and scope

Compare and contrast the purpose and scope of the Federal Insecticide, Fungicide, and Rodenticide Act with the provisions of the Federal Food, Drug, and Cosmetic Act.

  Prepare an outline of the experimental design

Prepare an outline of the experimental design you will suggest to the plant manager. This outline should contain research rationale, aims and objectives, research methodology, nature of data analysis and interpretation, and possible outcomes/concl..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd