Determine the vapor concentration and partial pressure

Assignment Help Mechanical Engineering
Reference no: EM131337777

An object of irregular shape 1 m long maintained at a constant temperature of 100°C is suspended in an airstream having a free stream temperature of 0°C, a pressure of 1 atm, and a velocity of 120 m/s. The air temperature measured at a point near the object in the airstream is 80°C. A second object having the same shape is 2 m long and is suspended in an airstream in the same manner. The air free stream velocity is 60 m/s. Both the air and the object are at 50°C, and the total pressure is 1 atm. A plastic coating on the surface of the object is being dried by this process. The molecular weight of the vapor is 82, and the saturation pressure at 50°C for the plastic material is 0.0323 atm. The mass diffusivity for the vapor in air at 50°C is 2.60 × 10-5 m2 /s.

(a) For the second object, at a location corresponding to the point of measurement on the first object, determine the vapor concentration and partial pressure.

(b) If the average heat flux q" is 2000 W/m2 for the first object, determine the average mass flux n"A (kg/s· m2) for the second object.

Reference no: EM131337777

Questions Cloud

Provide an executive summary of the article : Provide an executive summary of the article (an executive summary is a synopsis of all the basic information in a longer article).  The summary is to include the basic information in the articles, outlining the article's purpose, methods, findings..
Describe the product or service : Describe the product or service, including its main characteristics. Why do you believe this product is worthwhile?
Why is wacc so important for a business owner to understand : Why is WACC so important for a business owner to understand? Why would a business owner look to maximize the amount of debt he or she can borrow and minimize the amount of equity he or she would need?
Evaluate the culture of a department : The Human Resources Department at your facility has informed you (the HIM Department Director) that the HIM staff is the most culturally diverse staff in the facility. HR has asked you to provide a training session to other Department Directors on..
Determine the vapor concentration and partial pressure : For the second object, at a location corresponding to the point of measurement on the first object, determine the vapor concentration and partial pressure.
Identify the victim name dave and typology of child : Identify the victim name Dave and typology of child maltreatment received which was physical, verbal, and emotional abuse from his mother. Correlate the evidence in your case from the book.Identify causal factors. What causal factors are evident i..
Define the csi effect for the purposes of the article : Define the CSI effect for the purposes of the article.- Analyze and identify the research questions in the article.- Summarize the methods and findings of the chosen article.
Case study analysis and group discussion : Apply knowledge of employment law and compliance through case study analysis and group discussion (partially).
What business functions do you perform : What business functions do you perform? Which of the telephone technologies or other technologies are used at your company? (Example: VoIP, ACD, VRU) Are these technologies effective? Explain why or why not.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Show that after the clamp is released the flow rate

there are two reservoirs- one containing blood another containing plasma. reservoir 1 containing blood is at a higher

  Calculate the normal discharge and the froude number

Water is flowing in a formed, unfinished concrete rectangular channel 3.5 m wide. For a depth of 2.0 m, calculate the normal discharge and the Froude number of the flow. The channel slope is 0.1 percent.

  The record low sea-level barometric pressure ever recorded

the record low sea-level barometric pressure ever recorded is 25.8 in. of mercury. at what altitude in the standard

  Calculate the boundary-layer thickness at the end of plate

Calculate the boundary-layer thickness at the end of the plate (for the two cases). Assume laminar flow (Blasius solution) and use seawater properties from Table 1.1.

  Benefits of involving users in release testing

What are the benefits of involving users in release testing at an early stage in the testing process? Are there disadvantages in user involvement?

  Calculate the density of the mixture

The density of the mixture.

  Find the total turbine work and the total heat transfer to

a steam engine consists of a boiler tank connected to a turbine. the boiler tank has a volume of 100 l and initially

  Find the beam''s maximum deflection

A steel bar with the cross section shown and effective length L = 2.5 m is subjected to a compressive load P = 200 kN with a eccentricity e = 0.00625 m.

  Determine the maximum velocity leaving the nozzles

Determine the maximum velocity leaving the nozzles and the maximum absolute Mach number in the stage;

  Calculate the stress aab and also the lifting force p

The lengths of the cab les are such that AB is vertical, BD is horizontal, BC is inclined by a small angle β to the vertical, and DE is inclined by a small angle f3 to the horizontal. The effective cross-sectional area of the cable is denoted Ac.

  Determine the maximum bending stress developed in the tube

A high strength steel [E = 200 GPa] tube having an outside diameter of 80 mm and a wall thickness of 3 mm is bent into a circular curve having a 52 m radius of curvature. Determine the maximum bending stress developed in the tube

  The operating reflux ratio is 30 assume that raoults law

distillation of multicomponent alcohol mixture. a feed of 30 mol methanol a 20 ethanol b 15 n-propanol c and 35

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd