Determine the values of the stress and the change in the

Reference no: EM13563730

A rectangular steel plate with thickness t=0.625 inches is subjected to normal stresses sigma x and sigma y.The strain in the x direction is known to be 0.00065 and the strain in the y direction is known to be 0.0004. If E=30x10^6 psi and the poissons ratio=0.3,determine the values of the stress and the change in the thickness of the plate.

Reference no: EM13563730

Questions Cloud

Determine the maximum stress and strain in the ball : A rubber ball is inflated to a pressure of 65 kPa .At that pressure the diameter of the ball is 240mm and the wall thickness is 1.25 mm.The rubber has a modulus of elasticity E of 3.6 Mpa and a poisoon'd ratio of 0.48.

What is the maximum internal pressure : A cylindrical pressure vessel can support an internal pressure of 2640 psi. The maximum hoop stress is (65000/2) psi and the maximum shear stress is 16000 psi. If the diameter of the tank is 7 inches,what is the minimum wall thickness. If the wall th..

Determine the maximum shear stress in the material : An element of aluminiun in the form of a rectangular parallel pipe has a length 'a' along the x axis of 5.5 inches, a length 'b' along the y axis of 4.5 inches and a length 'c' along the z axis of 3.5 inches.

What are the problems associated with this method in terms : In bridge widening projects, the method of stitching is normally employed for connecting existing deck to the new deck. What are the problems associated with this method in terms of shrinkage of concrete?

Determine the values of the stress and the change in the : A rectangular steel plate with thickness t=0.625 inches is subjected to normal stresses sigma x and sigma y.The strain in the x direction is known to be 0.00065 and the strain in the y direction is known to be 0.0004

Determine the stresses acting on an element oriented at an : Using the stress transformation equations only,given a stress state where sigma x=105 MPa,sigma y=75 MPa and tau xy=25 MPa, determine the stresses acting on an element oriented at an angle 40 degrees from the x axis.

Find the speed of a rider at the bottom of the track : One of the new events in the 2002 Winter Olympics was thesport of skeleton. In the absence of non conservative forces, such a frictionand air resistance, what would be the speed of a rider at the bottom of the track

Determine the temperature at the end of the process and the : Air undergoes a polytropic expansion process in a piston-cylinder assembly from 75 psia and 300 F to 15 psia. Employing the ideal gas model with constant specific heat ratio k

What is the easiest way to solve for those 2 unknowns : Are either of the Ax or Jx forces relevant to finding the tension between H and J? If so, what is the easiest way to solve for those 2 unknowns?

User Account

All Pages