Determine the uniform stress developed

Assignment Help Civil Engineering
Reference no: EM132416281

A cube of size a is restrained in all directions and free in the top. A compressive load of 10 MPA is applied in the Y direction. Determine the uniform stress developed in X and Z directions

Reference no: EM132416281

Questions Cloud

Discuss the suitability and performance of the coarse : Discuss the suitability and performance of the coarse grained soil for engineering purposes? Also compare to fine-grained soil.
Determine the rotational speed : If the pump is required to deliver water at a head of 30.5 m at maximum efficiency, determine the rotational speed, the discharge, and the required power.
What should the minimum width of the straps : What should the minimum width of the straps be in order to limit the stress to 120 MPa, whereby straps are available in increments of 5 mm widths.
Responsibility for discrete work : It is the project manager's responsibility to ensure that each team member is assigned primary responsibility for discrete work, recognizing
Determine the uniform stress developed : A compressive load of 10 MPA is applied in the Y direction. Determine the uniform stress developed in X and Z directions
Calculate the sensible portion of the humidification : Calculate the sensible portion of the humidification for steam injected into the airstream (BTU/hr). Moist air at 60ºF 20% RH enters a heater and humidifier
Calculate the outlet air temperature : Calculate the outlet air temperature if the inlet air is Twb=32ºF and 40% RH. The air is flowing at 2500 cfm and is sensibly heated at a rate of 80,000 btu/hr.
Calculate the necessary flow rate of air : Calculate the necessary flow rate of air (cfm) moving over a heat exchanger if the heater is rated at 6,000 btu /hr.
Draw an event tree to present all possible scenarios : Estimate the risk due to this hazard. Draw an event tree to present all possible scenarios for the situation.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Estimate convective heat transfer coefficent for natural

Estimate the convective heat transfer coefficent for natural convenction from a horizontal steam pipe. The outside surface temperature of the insulated pipe is 80 degree C. The surrounding air temperature is 25 degress C.

  Determine the maximum speed for each car

determine the maximum speed for each car. The coefficient of static friction is πs =0.90 for both cars.

  How to design for a two-lane road in mountainous terrain

A horizontal curve is to be designed for a two-lane road in mountainous terrain. The following data are known: intersection angle: 50 degrees, tangent length: 400 ft, station of PI: 2000+00, e: .08, fs:.16

  How are the weight values of competitive layer distributed

Write a MATLAB M-file to implement a competitive layer. Use the M-file to train a five-neuron competitive layer on the squared values until its weights are fairly stable.

  Determine the magnitude of its acceleration at the instant

car traveling along a circular curve that has a radius of 50m. if its speed is 16m/s and is increasing uniformly at 8 m/s^2 determine the magnitude of its acceleration at this instant

  Calculate the coefficient of volume compressibility

In an oedometer test, the void ratio of a clay sample changed from 1.62 to 1.41 as the vertical effective stress imposed on the sample was increased from 100 kPa to 200 kPa. Later on, the vertical effective stress on the sample was decreased

  Determine the maximum rimpull of the tractor in each gear

A pneumatic-tired tractor with a 354 - hp engine has a maximum speed of 3.6 mph in 1st gear. Determine the max. rimpull of the tractor in each gear if the engine effieicency is 91%. (1st gear = 3.8 mph, 2nd gear = 6.5 mph, 3rd Gear = 11.5 mph, 4th Ge..

  Determine what is the turbidity downstream from charlotte

The James River flows in from the East at 50 m^3/s and joins the Jackson River flowing at 500 ft^3/min just outside Charlotte, NC. The turbidity in the James River is 6.8 NTU.

  Determine the rate of flow-unconfined aquifer

In an unconfined aquifer having K = 30/m/day, two observation wells, 3km apart, have water levels of 50 and 40 m, respectively, above the base of the aquifer. Determine the rate of flow.

  The mole fraction of co2 gas dissolved in water at 290 k

The value of Henry's constant for CO2 gas dissolved in water at 290 K is 12.8 MPa.

  Which subcontractor is responsible for drilling and sealing

What must be provided for a condensate line from the fan coil inside a walk-in freezer to keep the water from freezing? Which subcontractor is responsible for drilling and sealing the penetration through the cooler panel for the condensate line to..

  Translate the strings into hexadecimal ascii byte values

Translate the strings into 16-bit Unicode (using hex notation and the Basic Latin character set).

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd