Reference no: EM13649312
Question 1:
a) Discuss the methods used for finding the approximate transformer parameters Rser, Lser, Rpar, and Lpar.
b) Explain what each of the parameters Rser, Lser, Rpar, and Lpar model and show their positions in the transformer's circuit diagram.
Following transformer testing on a 100 WA, 50 Hz, 1000 V:250 V step-down transformer, the following results table was compiled:
|
|
Open-circuit test
|
Short-circuit test
|
|
Voltmeter reading (V)
|
1000
|
505
|
|
Ammeter reading (A)
|
2.5
|
7.2
|
|
Wattmeter reading (W)
|
105
|
88
|
c) From the transformer data and table determine the transformer's equivalent resistive parameters.
d) Likewise, determine the transformer's equivalent inductive parameters.
The transformer of (c) and (d) has an iron loss of 92 W and it is used on full-load with a power factor of one. What are the copper losses when its efficiencies are:
e) 98 %?
f) 84 %?
Question 2:
a) Electrical power generation and transmission requires electrical companies to charge tariff to cover costs and make profit. Discuss their capital and running charges.
An industrial unit utilising electrical machinery has a maximum demand of 250 kW, it has a power factor of 0.8 and a load factor of 0.35. Consider the following tariffs, and determine their annual (consider I year having 365 days) cost of electricity and their corresponding costing per kWh:
b) A maximum demand charge of £25/kW and a running charge of 5 p/kWh.
c) A maximum demand charge of £20/kVA and a running charge of 5 p/kWh
d) A basic maximum demand charge if £25/kW. This increases by a factor of 0.15 for each 0.1 the power factor is worse than 0.9. The running charge is 5 p/kWh.
e) Which tariff system would you recommend to the industrial unit?
Question 3:
a) Draw a schematic diagram of a per-phase synchronous electrical, generator.
b) Define the components in the armature (stator) side of the diagram
c) Define the generators torque components.
d) Define the enerators power components
A 3-phase, 600 WA synchronous generator has a rated line voltage of 3300 V. The stator winding is star connected and has a resistance of 0.37 Ω/phase Its synchronous impedance is 4.3 Ω/phase.
e) Draw the synchronous generator's per phase voltage and current phasor diagram.
f) Calculate the per phase output voltage.
g) Determine the voltage dropped across the synchronous impedance.
Calculate the synchronous generator's voltage regulation and output power for full loads having power factors of:
h) Unity.
I) 0.8 lagging.
|
Determine transformers equivalent inductive parameters
: Discuss the methods used for finding the approximate transformer parameters Rser, Lser, Rpar, and Lpar and explain what each of the parameters Rser, Lser, Rpar, and Lpar model and show their positions in the transformer's circuit diagram.
|
|
Strikes the top of a building standing directly at water
: A submarine is 300 m horizontallyout from the shore and 143 m beneaththe surface of the water. A laser beam is sent from the sub so thatit strikes the surface of the water at a point 232 m from the shore. If the beam just strikes thetop of a build..
|
|
Research project management trends
: Research Project Management Trends
|
|
Estimate what is the temperature of the cold reservoir
: 200 J enters a Carnot engine from the hot reservoir, held at400 K. What is the temperature of the cold reservoir
|
|
Determine the transformers equivalent resistive parameters
: Discuss the methods used for finding the approximate transformer parameters Rser, Lser, Rpar, and Lpar and determine the transformers equivalent resistive parameters.
|
|
Anthropologist focuses her camera on a distant mountainpeak
: An anthropologist focuses her camera on a distant mountainpeak when she sees a very interesting looking monkey just 5.2 m away. Quickly sheadjusts the focus and takes the picture. If her lens has a focal length of 41mm,
|
|
What is the ratio of the initial and final intensities
: Four polarizing sheets are placed one behind the other, each onemaking an angle of 20o with the preceding one. A polarized beam of light with itselectric field making an angle of 30o with the first polarizing sheet impinges on this assembly.
|
|
How far will the car slide once the brakes are applied
: a 14700n car is traveling @ 25m/s. the brakes are applied suddenly, and the car slides to a stop the average braking force between the tires and the road is 6980n. how far will the car slide once the brakes are applied
|
|
Define what is the concentration of naoh solution
: 18.0 mL of HCl was required to titrate 10.0 mL of a 10.0% by mass NaOH solution (density=1.1 g/mL). What is the concentration of NaOH solution
|