Determine the total time per cycle for minimum total cost

Assignment Help Chemical Engineering
Reference no: EM131061496

A continuous evaporator is being used to concentrate a scale-forming solution of sodium sulfate in water. The overall coefficient of heat transfer decreases according to the following expression:

Where U = overall coefficient of heat transfer, Btu/(h)(ft2)(°F), and θb, = time in operation, h.

The only factor which affects the overall coefficient is the scale formation. The liquid enters the evaporator at the boiling point, and the temperature and heat of vaporization are constant. At the operating conditions, 990 Btu are required to vaporize 1 lb of water, the heat-transfer area is 400 ft2, and the temperature-difference driving force is 70°F. The time required to shutdown, clean, and get back on stream is 4 h for each shutdown, and the total cost for this cleaning operation is $100 per cycle. The labor costs during operation of the evaporator are $20 per hour. Determine the total time per cycle for minimum total cost under the following conditions:

1276_383ef916-ce61-4ca0-b3f1-08a99153c0a6.png

(a) An overall average of 65,000 lb of water per 24-h day must be evaporated during each 30-day period. (b) An overall average of 81,000 lb of water per 24-h day must be evaporated during each 30-day period.

Reference no: EM131061496

Questions Cloud

Calculating the molarity of a solution : What is the molarity of a solution containing 9.478 grams of RuCl3 in enough water to make 1 litre of solution?
How much of this information could be obtained : How much of this information could be obtained from laboratory or pilot-plant tests?
Differences between the sharpe and treynor ratios : Explain the similarities and differences between the Sharpe and Treynor ratios. Also, explain the most appropriate application for each - Explain a key advantage and a key disadvantage of Jensen's alpha.
Reaction of gaseous nitrogen dioxide with water : Nitric acid can be produced by the reaction of gaseous nitrogen dioxide with water.
Determine the total time per cycle for minimum total cost : An overall average of 65,000 lb of water per 24-h day must be evaporated during each 30-day period. (b) An overall average of 81,000 lb of water per 24-h day must be evaporated during each 30-day period.
Find the lateral position of the speck : On a sheet of graph paper, plot the points (x, y) in your chart. You should see a smooth curve. Otherwise something is off. Find the lateral position of the speck, x, in terms of Θ
Question regarding the vapour pressure : Two liquids, A and B, form an ideal solution. Liquid A has a molar mass of 95.1 g mol-1 and liquid B a molar mass of 64.3 g mol-1. At 25 oC, the vapour pressure of A is 92.8 torr and that of B is 77.2 torr. For a mixture containing 50 g of each li..
What tower diameter should be used for optimum conditions : What tower diameter should be used for optimum conditions of minimum total cost per year?
How did target respond to the data breach : What could have caused this data breach? How did Target respond to the data breach?

Reviews

Write a Review

Chemical Engineering Questions & Answers

  The fractional selectivity of ethane to acetaldehyde

In a process to produce 1000 kgmol/h acetaldehyde, ethane is fed to the reactor at 1500 kgmol/h and the fractional conversion is 0.8. The product stream contains 2 mol% CO2. Calculate the molar composition of the product stream and the fractional sel..

  Oxidation to form formaldehyde and water

A mixture containing 98 mol% methanol and 2 mol% of an inert contaminant is available as a feed to a formaldehyde plant. The fresh feed to a process consists of 1000 kmol/h of this mixture along with 200 kmol/h of oxygen. All of the oxygen is consume..

  Adsorption and membrane processeszeolites are used to

adsorption and membrane processeszeolites are used to adsorb a wide range of solutes from vapour and gas streams. what

  Evaluation of a new chemical manufacturing process

Prepare the design and evaluation of a new chemical manufacturing process.

  Calculate the density of atoms along

Calculate the density of atoms along [011] in molybdenum (Mo). Express your answer in units of atoms/cm.

  Find the voltage and power at the sending

find the voltage and power at the sending end and the voltage regulation.

  What is the total liquid and vapor flow rates at entrance

Determine whether this processes is a stripping process or an absorption process. What is the total liquid and vapor flow rates at the entrance and exit of the tower

  What is the total filtering area required to deliver 30 ft3

what is the total filtering area required to deliver 30 ft3 of filtrate in 1/2 h?

  Gas phase reactor at 3000 k and 1 atmosphere pressure

The following two reactions take place in a gas phase reactor at 3000 K and 1 atmosphere pressure: 2CO2(g) 2CO(g) + O2(g) Keq.1071 O2(g) + N2(g) 2NO(g) Keq.01493

  An electron falls from the conduction band of silicon

An electron falls from the conduction band of silicon (Si) to the valence band. The band gap of Si is 1.1 eV. What is the wavelength of the photon emitted by this process? Give your answer in nm

  A process heater uses dowtherm

A process heater uses Dowtherm A heat transfer fluid to provide 850 kW of heat. Estimate the annual operating cost of the heater if the Dowtherm evaporator is 80% efficient and the price of natural gas is $4.60/MMBtu. Assume 8000 operating hours p..

  What is the final velocity of the proton

Which do you think would make the best resistor and why?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd