Determine the total number of unit cells in the foil

Assignment Help Civil Engineering
Reference no: EM13302862

aluminum foil used to package food is approximately 0.001 inch thick. assume that all of the unit cells of the aluminum are arranged so that a is perpendicular to the foil surface. for a 4in x 4in square of foil determine the total number of unit cells in the foil and the thickness of the foil in number of unit cells

Reference no: EM13302862

Questions Cloud

Estimate the constant rate of withdrawal from reservoir : Estimate the constant rate of withdrawal (in m^3/s) from a 1375 ha reservoir in a month of 30 days during which the reservoir level dropped by 0.75 m in spite of an average inflow into the reservoir of 0.5 Mm^3/day.
Determine the speeders speed with respect to the ground : A speeder is pulling directly away and increasing his distance from a police car that is moving at 25 m/s with respect to the ground. Find the speeder's speed with respect to the ground
Why are interest rates on short-term loans not necessary : Why are interest rates on short-term loans not necessarily comparable to each other? Give three possible reasons.
Explain whether the change should increase or decrease sales : Optical Supply Company offers credit terms of 2/10, net 60. If Optical Supply is considering a change in its credit terms to one of those indicated, explain whether the change should increase or decrease sales.
Determine the total number of unit cells in the foil : aluminum foil used to package food is approximately 0.001 inch thick. assume that all of the unit cells of the aluminum are arranged so that a is perpendicular to the foil surface.
Determine the horsepower dissipated in the jump : water flows at a velocity of 25 ft/s at a depth in a rectangular channel 16 feet wide. Determine the downstream depth necessary to form a hydraulic jump, the head loss through the jump and the horsepower dissipated in the jump.
Diagram the metabolic pathways of this bacterium : Rhodopseudomouses anaerobic photoautotroph that uses compounds as an eletron donor. It is also capable of chemoheterotrophc metabolism. Diagram the metabolic pathways of this bacterium
What is the gain or loss in inventory value in u.s. dollars : The inventory in Britain is still valued at 240,000 pounds. What is the gain or loss in inventory value in U.S. dollars as a result of the change in exchange rates? Show your work.
Definitions of behavior : Rewrite the following definitions of behavior so that they include only observable, measurable, and repeatable examples of behavior.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the maximum water-hammer pressure that can occur

Water flows in a 100-m long pipe at 3 m/s. If the water temperature is 20 degrees C, determine the minimum valve-closure time to avoid creating the water-hammer pressures. What is the maximum water-hammer pressure that can occur

  Calculate the deflection of the beam

Also calculate the deflection of the beam to check that it complies with the design limit of L/200. Only variable actions are required for deflection check.

  Determine how deep will the water be on the flash boards

The pipes holding the boards were placed 10 ft apart across the dam. There were 20 pipes and each one was designed to fail under a bending moment of 1625 ft-lb how deep will the water be on the flash boards when failure occurs

  How to label turing points numerically starting with tp1

A differential leveling loop started and closed on BM Juno, elevation 5194.02 ft. The BS and FS distancces were kept approximately equal. Readings (in ft) listed in the order takken are 9.65, 2.11, 2.51, 8.35, 2.06, 9.25, 7.93, 2.83, 5.05, and 4.6..

  Estimate the pressure change over 80 m of pipeline

Water at 20ºC flows at a velocity of 2 m/s in a 200-mm diameter horizontal ductile-iron pipe. a) Estimate the friction factor in the pipe, and state whether the pipe is hydraulically smooth or rough.

  Determine the storage coefficient over a surface area

Over a 100-mi^2 surface area, the average level of the water table for an unconfined aquifer has dropped 10 ft due to the removal of 128000 acre*ft of water from the aquifer. Determine the storage coefficient. The specific yield is 0.2 and the por..

  Determine what will be carbondioxide level 10 years later

Assume to just using coal as an electric energy source. Take efficency as %50 for average power plant.If the carbondioxide level is 400 ppm by volume now, what will be the carbondioxide level 10 years later

  Perception-reaction time on a roadway

An engineering student is driving on a level roadway and sees a construction sign 180 m ahead in the middle of the roadway. The student strikes the sign at 56 kph. If the student was traveling at 90 kph when the sign was first spotted, what was th..

  What would the salt concentration be in the brine

A reverse osmosis plant desalinates 5X10^6 L/day of feedwater containing 1500 mg/L of salts, yielding 3X10^6 L/day of product water with 75 mg?l of salt. What would the salt concentration be in the brine?

  How do concept of green design and industrial ecology differ

How do the concepts of green design, industrial ecology, and sustainable developement differ from past approaches to engineering design Prepare a brief report on this topic using some specific examples for illustration.

  Percent by weight of limestone

A slurry containing 20 percent by weight of limestone (CaCO 3 ) is processes to separate pure dry limestone from water. If feed rate is 2000kg/h, how much CaCO 3 is produced per hour?

  Determine the theoretical discharge

A vertical triangular orifice in the wall of a reservoir has a base 0.9m long,0.6m below its vertex and 1.2 m below the water surface. determine the theoretical discharge?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd