Determine the tension in the cables de and bc and the

Reference no: EM13550300

1.Determine the tension in the cables DE and BC and the components of reaction of the smooth collar at A. The sign weighs 75 lb.

2.Water with a static pressure of 1.96kN/M2 flows through an 800 mm diameter pipe. A pitot tube pressure gage in this pipe reads a pressure of 5.88 kN/M2. Determine the velocity (V)

Reference no: EM13550300

Questions Cloud

Find the speed of the center of mass of two-cart system : Cart A, with a mass of 2 kg, travels on a horizontal air-track at 3 m/s and hits cart B, what is the speed of the center of mass of the two-cart system

Determine the total volume of the sandy silt : A 200,000 cubic m highway embankment is to be constructed at dry density of 1.85 Mg/m^3 and optimum moisture content of 16% by compacting sandy silt taken from a borrow pit. The in-situ bulk density of the sandy silt is 1.92 Mg/m^3 and its average wa..

A ferric chloride dosage of 40 mg/l and an equivalent dosage : A ferric chloride dosage of 40 mg/l and an equivalent dosage of lime are used to coagulate a water.

Calculate the fiber weight fraction : For unidirectional carbon/epoxy tape at a 60% fiber volume fraction, calculate E11 and E22. Given Ef= 211 GPa and Em =10 GPa. Calculate the fiber weight fraction. Given pf=1.95 g/cm3 and pm =1.3 g/cm3.

Determine the tension in the cables de and bc and the : Water with a static pressure of 1.96kN/M2 flows through an 800 mm diameter pipe. A pitot tube pressure gage in this pipe reads a pressure of 5.88 kN/M2. Determine the velocity (V)

What ph is required to achieve this aluminum ion : A) Aluminum ion (Al3+) is present in an industrial wastewater at 3 mg/L. The treatment facility wants to precipitate out the aluminum until there is only 0.2 mg/L remaining. What pH is required to acheive this aluminum ion concentration?

Explain the main features of the plot : A constant flow of water, 30 lbm/s, enters a cylindrical container from the top. At the bottom, an opening allows water to drain out at a rate, in lbm/s, that is proportional to H(t), the instantaneous height of water in the barrel, in ft

Plastic containers manufactured by a certain process : Suppose that 0.03% of plastic containers manufactured by a certain process have small holes that render them unfit for use. Let X represent the number of containers in a random sample on 10000 that have this defect. Find

Evaluate the buoyant force on the ball : A ball of circumference 73.6 cm and mass 600 g is forced to the bottom of a swimming pool and then released. After initially accelerating upward, Calculate the buoyant force on the ball

User Account

All Pages