Determine the tension in cable and the reaction

Assignment Help Mechanical Engineering

Reference no: EM13709251

A 12-m pole supports a horizontal cable CD and is held by a ball and socket at A and two cables BE and BF. Knowing that the tension in cable CD is kN and assuming that CD is parallel to the x axis (phi = 0), determine the tension in cable BE and BF and the reaction at A

Reference no: EM13709251

Questions Cloud

Use the constant specific heats at room temperature : An air-standard dual cycle has a compression ratio of 18.2 and a cut off ratio of 1.31. The pressure ratio during constant volume heat addition process is 1.5. At the beginning of the compression, P1=80 kPa, T1 = 20°C at the beginning of the cycle. U..

Calculate the uncertainty in the dimensional measurement : A pneumatic displacement gage has d1=0.762 mm and d2=1.575 mm. The supply pressure is 68919.7 Pa with a random fluctuation of ±483 Pa, and the differential pressure Pd-Pa is measured with a water manometer that may be read with an uncertainty of 12.4..

Species is limiting reactant using appropriate calculation : 100 grams moles of the feed with composition of 40% methane, 50% chlorine, and 10% nitrogen, are fed to the reactor every hour, the conversion of the limitining reactant is 67%. Determine which species is the limiting reactant using appropriate calcu..

How far does the softball travel horizontally before it hits : You are standing on a cliff overlooking a lake and decide to throw a softball to your friends in the water below. How far does the softball travel horizontally before it hits the water

Determine the tension in cable and the reaction : A 12-m pole supports a horizontal cable CD and is held by a ball and socket at A and two cables BE and BF. Knowing that the tension in cable CD is kN and assuming that CD is parallel to the x axis (phi = 0), determine the tension in cable BE and BF a..

Determine what the acceleration of the car : Calculate the acceleration of a 1400-kg car that stops from 34km/h "on a dime" (on a distance of1.7 cm). Determine the acceleration of the car

Compared to cross-linked polymers-linear polymer chains : Compared to cross-linked polymers, linear polymer chains:

Find the current in each case : The resistance and the magnitude of the current depend on the path that the current takes. Find the current in each case

Does the client–user–designer model still apply : Suppose you are working for a start-up company that is designing a very new and innovative product. Does the client–user–designer model still apply? Who is your client in this case? Since you don’t have any customers yet, who are the users and how ca..

User Account

All Pages