Determine the temperature rise in metal temperature

Assignment Help Other Engineering
Reference no: EM13933963

An investigator conducts a study on the heat transfer and the effects of inter- nal scale thicknesses on a reheater tube metal temperature of a boiler, which operates with a steam temperature 530°C under pressure 13,700 kPa. The boiler tube has an OD of 2.0 inch with a 0.2 inch wall thickness, made of steel grade SA-213 T-22.

Using the following information:

Thermal conductivity of tube metal, kT: 28.884 W/m.K

Thermal conductivity for scale, kD: 0.592 W/m.K

Flue gas temperature, TO: 800°C
Steam side heat transfer coefficient, hS: 1702 W/m2K

Gas side heat transfer coefficient, h0: 92 W/m2K

Determine the temperature rise in metal temperature due to the increase in scale thickness from 30 microns to 500 microns. The overall heat transfer coefficient is given by:

UO={[1/hO]+[rOIn(rO/ri)/kT]+[roIn(ri/rS)/kD]+[rO/rShS]}-1

where the subscript ‘O' denotes the gas side, "i" denotes the inner surface of the tube, "S" denotes the steam side, "T" denotes the tube, and "D" denotes the scale deposit. The temperatures and radii are illustrated in the following schematic diagram of a boiler tube section.

2351_Schematic Diagram of a Boiler Tube Section.png

Reference no: EM13933963

Questions Cloud

What inspections or tests will you perform : Your task is to ensure that the steam path is in good condition and passes the periodic inspections by regulatory bodies, for a license to operate the boiler. What inspections/tests will you perform?
Sections of the employment standards act : Cite the section numbers and briefly explain (summarize) the sections of the Employment Standards Act that relate to Mr. Swift's termination, and the specific obligations that the employer has under the Act. (E.g. The specific notice or pay in lieu o..
Identify ideas of social control and social disorganization : Identify the ideas of social control and social disorganization theories that are absent from the strategy and described how these ideas could be applied and what their potential outcome would be.
Identify three most relevant strategies to solve problems : Using the analytical tools from the Excel file identify the three most relevant strategies to solve problems/issues. Include IE, BCG, SPACE, GRAND and QSPM matrices, and financial projections with short and long term implementation plan
Determine the temperature rise in metal temperature : Determine the temperature rise in metal temperature due to the increase in scale thickness from 30 microns to 500 microns. The overall heat transfer coefficient is given by [10]:
Recent policy changes of drug treatment-testing : What recent policy changes of Drug treatment & testing (i.e. background to my topic). What research in area of Drug treatment & testing What area of agreement. Does it or does it not work?
Advising for criminal liability : Rohit is eager to show his off his new skills in breking wood and sees a poker table leaning against the wall in the corner of the room..... Advise Rohit and Umut as their criminal liability, if any.
Provisions in the commonwealth act : (i) which, if any, of the provisions in the Commonwealth Act are supported by the Commonwealth Constitution (ii) whether any of the provisions in the Commonwealth Act might be found to infringe any other constitutional limits or prohibitions and
Explains james responsibility to acknowledge and address : Explain Yelena's responsibility and what special issues regarding her perimenopause will need to be addressed. Explains James' responsibility to acknowledge and address.

Reviews

Write a Review

Other Engineering Questions & Answers

  Design the appropriate architecture for the project

You are required to design an energy meter based on CPLD (Complex Programmable Logic Device) that will smartly disconnect the supply when sufficient amount of energy units are consumed. The device needs to be programmed using VHDL computing language.

  Traction force between the tires and the road

A car uses 25 hp to drive at a horizontal level at constant 100 km/h. What is the traction force between the tires and the road?

  Calculate the molar composition of gas

Calculate the molar composition of this gas on both a wet and a dry basis and the ratio (mol H2O/mol dry gas).

  Partial vacuum in a reservoir

Figure is a sketch of an aspirator, a simple device that can be used to achieve a partial vacuum in a reservoir connected to the vertical tube at B. An aspirator attached to the end of a garden hose may be used to deliver soap or fertilizer from t..

  Issues relating to the ethical conduct

As the head health care administrator at USA Community Hospital, you are required to review compliance reports on issues relating to the ethical conduct of the professional staff at your hospital, patient review registries, and standard procedures..

  Determine how many units of each product to produce

Determine how many units of each product to produce so as to maximize profit. For each unit of product 1, 1 unit of frame parts and 2 units of electrical components are required.

  Force with an equivalent force-couple system

A plumber applies a 220-N force to the handle of a wrench as she removes a coupling from the end of a pipe. Knowing that the wrench and the force lie in a vertical plane parallel to the yz plane, replace the force with an equivalent force-couple s..

  Adopt a condensing power plant

Adopt a condensing power plant with a feedwater tank (MV) with the wiring diagram and information - High-pressure turbines are isentropic efficiency of 0.88.

  Assignment on managerial communication oral presentation

For the purpose of this assignment, you are the chief information officer for the Stone Goose Company. This is your big chance to be the principle change agent in the Stone Goose Company and to propose a new social media policy to executive manage..

  Explain how the weighing scale you have dissected works

Explain how the weighing scale you have dissected works. Sketch free-hand an alternative design for the artifact. Write a one-page essay about how your design works.

  How many toys should retailer send to high-service channel

How many toys should the retailer send to the high-service channel and how many swimsuits should it purchase at the beginning of the season?

  Determine the ratio uo-umax

Water flows steadily through the round pipe in the figure. The entrance velocity is Vo. The exit velocity approximates turbulent flow, u = umax(1 - r/R) 1/7. Determine the ratio Uo/umax for this incompressible flow.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd