Determine the temperature at center plane of the brass plate

Assignment Help Mechanical Engineering

Reference no: EM13705967

A hot brass plate is having its upper surface cooled by impinging jet of air at temperature of 15 [Degree Celsius] and convection heat transfer coefficient of 220 W/(m^2*K). The 10-cm thick brass plate ( p=8530kg.m^3, Cp=380J/(kg*K), k=110 W/(m*K), and alpha=33.9*10^-6 m^2/s) has a uniform initial temperature of 650 [Degree Celsius], and the bottom surface of the plate is insulated. Determine the temperature at the center plane of the brass plate after 3 minutes of cooling.

Reference no: EM13705967

Questions Cloud

Determine the specific volume at the indicated state : For each case, determine the specific volume at the indicated state. Locate the state on a sketch of the T-v diagram.

Determine the specified property data at the indicated state : Using the tables for water, determine the specified property data at the indicated states. In each case, locate the state on sketches of the p-v and T-v diagrams.

Determine the overall surface efficiency : A 30-cm-long, 1-cm-diameter aluminium fin (k=237 W/mÂ·K) is exposed to an environment at 22oC. The base temperature of the fin is maintained at 80 oC. The heat transfer coefficient between the rod and the surrounding air is 11 W/m2Â·K.

Consider an ideal simple rankine cycle with steam : Consider an ideal simple rankine cycle with steam as the working fluid. Saturated vapor enters the Turbine at 8 MPa and saturated liquid exits the condenser at a pressure of 0.008 MPa. The net power output of the cycle is 100MW.

Determine the temperature at center plane of the brass plate : A hot brass plate is having its upper surface cooled by impinging jet of air at temperature of 15 [Degree Celsius] and convection heat transfer coefficient of 220 W/(m^2*K). The 10-cm thick brass plate ( p=8530kg.m^3, Cp=380J/(kg*K), k=110 W/(m*K), a..

Heat pump cycle delivers energy by heat transfer to dwelling : A Heat pump cycle delivers energy by heat transfer to a dwelling at a rate of 40,000 Btu/h.The coefficient of performance of the cycle is 2.8. Determine the power input to the cycle, in hp.

Neglect effects of gravity and kinetic energy : A rigid container with volume V is originally filled with water of Temperature T1. A hose is then connected to an inlet port and hotter water of temperature T2 is pumped into the container at mass flow rate m in., while another venting port allows th..

Water is heated until the tank contains only saturated vapor : A closed, rigid tank is filled with water. Initially, the tank holds 9.9 ft^3 saturated vapor and 0.1 ft^3 saturated liquid, each at 212F. The water is heated until the tank contains only saturated vapor.

Forearm acts in geometric center of respective body segment : Assume that the center of masses of the upper arm and the forearm acts in the geometric center of the respective body segment, and the center of mass of the hand acts at the same location that the cable is in the hand (given below). If the person is ..

User Account

All Pages