Determine the slenderness ratio

Assignment Help Civil Engineering
Reference no: EM13210705

Determine the slenderness ratio of a 5 m column with built in ends if its cross- section is (a) circular with a radius of 40mm and (b) 50 mm square. Use the concept of effective length.

Reference no: EM13210705

Questions Cloud

Identify how power relations have influenced : Identify how power relations have influenced how sports were defined, played, organized, and sponsored in the times and places described.
Explain balanced chemical equation for liquid octane : Give a balanced chemical equation for when liquid octane (C8H18) is combusted in oxygen gas to yield carbon dioxide gas and water vapor?
Determine the total crop water requirement : Determine the total crop water requirement including the leaching ratio of a corn crop with a ECt of 1.7mmhos cm-1 if the ECiw of the irrigation water and precipitation is 5 and 0 mmhos cm-1 respectively
What was ambroses total debt in 2012 : How much new long-term debt financing will be needed in 2013? Write out your answer completely. For example, 25 million should be entered as 25,000,000.
Determine the slenderness ratio : Determine the slenderness ratio of a 5 m column with built in ends if its cross- section is (a) circular with a radius of 40mm and (b) 50 mm square. Use the concept of effective length.
According to lecture listener anxious about upcoming exam : According to the lecture a listener anxious about an upcoming exam, worried about a recent argument with a friend, or distracted by cold air in the class room would be experiencing?
Explain opportunity cost associated with lower input level : As an agronomist you have been approached by a large pepper farmer who wishes to determine an appropriate"yield goal" fot this season. He provides you with yield data for ten year period which indicates that his production has been slowly decreasi..
Describe the reasons for enhancing drainage and situation : Describe the reasons for enhancing drainage and situation where it is required. Explain some of the detrimental effects of drainage. Describe the types of drainage system indicating suitability criteria. 200- 250 word limit
Explain how many grams of aluminum metal produced : How many grams of aluminum metal and how many liters of chlorine gas can be produced by passage of 4.8 amp of current for 2.3 hour under standard conditions (25?C and 1 atm pressure)?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Mass of water vapor diffuses through tube

If the water vapor is removed from the upper tank so that the concentration there remains nearly zero, what mass of water vapor diffuses through the tube each hour?

  Required to dewater a construction site

It is required to dewater a construction site 80 m by 80 m. The bottom of the construction will be 1.5 m below the initial water surface elevation of 90 m.

  Highway construction project

A soil sample was taken from a proposed cut area in a highway construction project and sent to a soils laboratory for a compaction test, using the Standard Proctor compaction procedure. Results of the test are as follows:

  Case study-disaster identifying safety management

Conduct a Case Study on this disaster identifying safety management, safety audits, accident investigation, and industrial hygiene issues. Your Case Study should be a minimum of 500 - 600 words and contain the components listed above.

  Using finite element method to find temperature of the poker

The temperature of the poker at the third points of the poker using three elements of equal length. Use the finite element method. You may use Mathcad to solve this problem. If you do, please show all work and add comments to the Mathcad solution ..

  Determine the required pumping rate

Four pumps are to be used in 0.5-m diameter wells at the four corners of the site. Determine the required pumping rate. The aquifer has T = 1600 m^2/day and the wells each have a radius of influence of 600 m.

  Superelevation rate for a roadway

What superelevation rate would you recommend for a roadway with a design speed of 100 km/hr and a radius of curvature of 500 m? Assume f = 0.11.

  Radioactive waste from a clinical laboratory

A radioactive waste from a clinical laboratory contains 0.2 μCi (microcuries) of calcium-45 (45Ca) per liter. The half-life of 45Ca is 152 days.

  Determine what angle of twist

a beryllium copper wire having diameter of 1-50 mm and length of 40mm is used as a small torsion bar in an instrument. determine what angle of twist would result in the wire when it is stressed to 250 mpa.

  Consolidation ratio of the soil at the unloaded condition

An increment of vertical stress of150kpa compress the sample to a void ratio of1.43. What is the over consolidation ratio of the soil at the unloaded condition.

  Determine the quality of the initial state

A two-phase liquid-vapor mixture of water is initially at a pressure of 10 bars. If on heating at fixed volume, the critical point is attained, determine the quality of the initial state.

  Esimating the capacity of the roadway

Given s=.30/(60-u), where s is the spacing (space headway) in miles, and u is the speed in miles per hour, derive the relationships u-k, u-q, and q-k. Also, estmate the capacity (qmax) of the roadway.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd