Determine the shannon capacity of such a system

Assignment Help Civil Engineering
Reference no: EM131202733

Common telephone systems have a bandwidth of 3 kHz and a signal-to-noise ratio of 48 dB. Determine the Shannon capacity of such a system.

Reference no: EM131202733

Questions Cloud

Find the reflection coefficient of a matched line : A mismatched transmission line is a line that is terminated in a load impedance that is different from the characteristic impedance of the transmission line.
How could these barriers be addressed : Describe a potential solution for each barrier you have identified. Explain how health insurance may influence concerns or decisions related to cost, quality, and/or access to care for the person in your selected case study.
Calculate the pulse amplitude modification : Twenty-five input signals, each band-limited to 3 kHz, are each sampled at an 8 kHz rate and then time-multiplexed.
List the type of and how many clients it serves : Choose a potential ethical dilemma that you may face in your chosen advanced practice nursing role. Describe the situation and potential solutions, including collaboration methods with other healthcare professionals.
Determine the shannon capacity of such a system : Common telephone systems have a bandwidth of 3 kHz and a signal-to-noise ratio of 48 dB. Determine the Shannon capacity of such a system.
Analyze lyrics from three songs : Analyze lyrics from three songs during this era;- Do any similarities exist between the ideals and characteristics that the lyrics portray and the ideals and characteristics of the Baby Boomer generation?
What has been the effect of the internet : What EVIDENCE does he offer to support his claims? How does his discussion of the changes wrought by other technologies help him make his argument?
What must the capacity of the channel : Ten digital signals are to be time-division multiplexed and transmitted over a single channel. What must the capacity of the channel be if each signal is sampled at 10 kHz and encoded with 10 bits?
Write a reaction to concept of the manufacturing of consent : Noam Chomsky 1980 Media Control)-  Write a reaction to the concept of the manufacturing of consent.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Iif flow is rotational and continous

Steady, incompressible flow is given by the following flowfields (a) u=-2y, v=-2x, and (b) u= 0.5+1.2x, V= -2-1.2y.Determine

  Estimate the constant rate of withdrawal from reservoir

Estimate the constant rate of withdrawal (in m^3/s) from a 1375 ha reservoir in a month of 30 days during which the reservoir level dropped by 0.75 m in spite of an average inflow into the reservoir of 0.5 Mm^3/day.

  Estimate settlement of footing four years after construction

The modulus of elasticity of the sand was determined to be 10,000 kN/m^3 throughout. Using the Schmertmann's method, estimate the settlement of the footing four years after construction, using four 1 meter thick sublayers.

  What landfill area will be required for solid waste disposal

Solid waste will be applied in 0.6 m "lifts" and will be compacted to a depth of 0.3 m. Daily cover soil will be applied to a depth of 0.15 m for the first four days of the operation in any week. At the end of the fifth day, a "weekly cover" layer..

  Determine the resultant internal loadings acting

If the drill bit jams when the brace is subjected to the forcesshown, determine the resultant internal loadings acting on the cross section of the drill bit at A .

  How the gravel will be scoured by the flowing water

The trapezoidal channel has a slope of .004. The sides of the canal are sealed with a plastic membrane, which is protected by a 1 ft thick layer of 1 in diameter gravel. The bottom is a 6 in slab of rough concrete.

  Find the bod concentrations at the outlet of both lagoons

The municipal wastewater treatment process for a hypothetiical town consists of two separate lagoons being operated in series. The first lagoon has a volume of 4 million gallons, while the second lagoon has a volume of 2.5 million gallons.

  What is the pressure applied to the soil under above load

what is the pressure applied to the soil under the above load. How does this compare with an allowable bearing capacity of 100kPa. Does this allow for a reasonable factor of safety.

  To what rate of corrosion in mm per yr dose the correspond

A thick steel sheet of area 440cm3 is exposed to air near the ocean. After a one-year period it was found to experience a weight loss of 880g due to corrosion. To what rate of corrosion in mm/yr dose this correspond

  What was the students associated reaction time

An engineering student is driving on a level roadway and sees a construction sign 600ft ahead in the middle of the roadway. The students strikes the sign at a speed of 35mi/h. If the student was travelling at 55mi/h

  Ompare the ratio of kinetic energy to the potential energy

If a unit mass of groundwater accelerates from rest to an average linear velocity of 1 m per year and climbs a vertical distance of 1 m, compare the ratio of kinetic energy to the potential energy of the unit of groundwater.

  Determine what would be the co concentration in the box

A simple way to model air pollution over a city is with a box model that assumes complete mixing and limited capability for the pollution to disperse horizontally or vertically except in the direction of the prevailing winds

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd