Determine the return and the risk associated with purchase

Assignment Help Civil Engineering
Reference no: EM13317712

A new machine will cost $25,000. The machine is expected to last 4 years and have no salvage value. If the interest rate is 12%, determine the return and the risk associated with the purchase. The estimated annual savings and its probability is $7000 at 30%, $8500 at 40%, and $9500 at 30%.

Reference no: EM13317712

Questions Cloud

Does construction method have any play in the construction : Battered piles are used on many construction projects as a permanent part of the element being constructed. Does this construction method have any play in the construction of a temporary earth retention system
What is the net charge of all these electrons : Water has a mass per mole of 18.0 g/mol, and each water molecule (H2O) has 10 electrons. What is the net charge of all these electrons
Choose one of the media articles or case studies listed : All the claims shown on the Rationale diagram must appear in the essay, and all claims made in the essay must appear on the Rationale diagram. The essay must present all the detailed information that the Rationale diagram cannot.
What is the shear modulus for this branch : A 24kg chimpanzee hangs from the end of a horizontal, broken branch of length L0 = 1.4m , What is the shear modulus for this branch
Determine the return and the risk associated with purchase : A new machine will cost $25,000. The machine is expected to last 4 years and have no salvage value. If the interest rate is 12%, determine the return and the risk associated with the purchase.
Compute the pw for the pessimistic and optimistic : An energy efficiency project has a first cost of $300,000, a life of 10 years, and no salvage value. Assume that the interest rate is 9%. The most likely value for annual savings is $60,000.
Calculate the magnitude of the total force supported : The uniform 4 meter boom has a mass of 60 kg and is pivoted to the back of the truck at A and secured by a cable at C. Calculate the magnitude of the total force supported by the connection at A
Calculate the change in entropy of a gas of mass : calculate the change in entropy of a gas of mass 8kg when 100 kj of heat energy is supplied to the gas. the temperature of the gas remains constant at 100 c during the heat transfer process
What is the settling velocity of a floc of diameter in water : What is the settling velocity of a floc of diameter 0.15 mm and density 2.12 g/cm3 in water. Will the floc from problem 4 be completely removed in a typical sedimentation basin if alum was used as the coagulant.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the magnitude of the total force supported

The uniform 4 meter boom has a mass of 60 kg and is pivoted to the back of the truck at A and secured by a cable at C. Calculate the magnitude of the total force supported by the connection at A

  Determine what is the intrinsic permeability of coarse sand

The hydraulic conductivity of a coarse sand was measured in the laboratory permeameter and found to be 1.03x10^-2 cm/s at 25 degrees C. What is the intrinsic permeability

  Coefficient of curvature for each soil

Determine the effective size as well as the uniformity coefficient and coefficient of curvature for each soil. Determine also the percentages of gravel, sand, silt, and clay according to (a) ASTM, (b) AASHTO, (c)USCS, and (d) the British Standard.

  Shear and bending moment expressions

Show or formulate the shear and bending moment expressions for each board, and plot/draw the shear and bending moment diagrams of the boards.

  Determine the void content

If the dry-rodded unit weight of an aggregate is 105 lb/ft3 (1680 kg/m3) and its specific gravity is 2.65, determine the void content.

  Determine the magnitude and direction of the resultant

Part of the roof of a sports stadium is to be supported by the cables AB and AC. The forces the cables exert on the pylon A to which they are attached are represented by the vectors FAB and FAC.

  Find the change in depth and in absolute water level produce

Find the change in depth and in absolute water level produced by a) a smooth upward step of 1 ft b) a smooth donward step of 1 ft, in the channel bed c) find the maximum allowable size of thw upstream flow to be a possible as specified

  Calculate loads on floor and roof one way slabs

The proposed 4 story reinforced concrete office building including a green roof is to be constructed. The building is confirm to IBC 2006/2009 and ACI-318-11. 1) Calculate Loads on Floor and Roof one way slabs.

  Determine the local acceleration and the total acceleration

At point 1 and point 2, it is also measured that dv1/dt = 20 m/s^2 and dv2/dt = 50 m/s^2 respectively. Determine the local acceleration, the convective acceleration, and the total acceleration at point 1 and 2 at t = 0

  Determine the distance d between a and b at the instant

At a given instant, the position of a plane at A and a train at B are measured relative to a radar antenna at O. Determine the distance d between A and B at this instant.

  Determine the flow of vehicles on the level section

From an aerial photograph, one observes that on a level section of a (multilane) highway, 25% of the vehicles are trucks, 75% are cars, and there are 50 vehicles per mile of highway. The trucks travel at 40 mph and the cars at 60 mph.

  Determine what is the actual length of the line for steel

A 100ft steel tape measure correctly when supported throughout its length under a tension of 1- lb and at a temperature of 72F.It is used on the field at a tension of 18 lb and supported at the two ends only.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd