Determine the required detention time and required volume

Reference no: EM13305241

A dispersed plug chemical reactor has an influent flow with concentration of 150 mg/L of A and a flow rate of 100 gal/min (380 L/min). The reaction is first order, The rate equation : - dC/dt = kC= -r , and the rate constant is 0.4 h^-1 . The axial or longitudinal dispersion number, D/vL is 1.0. Determine: a. The required detention time and required volume if the removal or conversion of A is 90%. Express the volume as gallons and liters. b. The required detention time and the reactor volume if the removal of A is 80%. Express volume as gallons and liters (The answers in the back of the book are for (a) is time dpf= 12.7 hr; vol=76,200 gal = 290,000 L; (b) is time dpf= 10.4 hr; vol=62,400 = 237,000 L)

Reference no: EM13305241

Questions Cloud

What would be the compressive strength of concrete for cube : If the max load is applied to the cylinder (6"x12") or (150x300mm) up to P=500 kips, what would be the compressive strength of concrete for (a) cylinder, (b) 150mm cube, and (c) 200mm cube.

Benefit to prepare financial statements on accrual basis : After reviewing Mr. Donaldson's accounting information, you are about to write a business memo to Mr. Donaldson. In the memo, you should compare cash-based operating cash flows with accrual-based net income and explain why it is of Mr. Donaldso..

What is the moment of inertia of the sphere : A solid sphere with a radius of 9.3 cm an mass of 373 g is allowed to roll 4.30 m without slipping down a 13.2 degree incline. What is the moment of inertia of the sphere

What is the implied value of each warrant : The current yield on similar straight bonds is 15.0 percent. What is the implied value of each warrant?

Determine the required detention time and required volume : A dispersed plug chemical reactor has an influent flow with concentration of 150 mg/L of A and a flow rate of 100 gal/min (380 L/min). The reaction is first order, The rate equation : - dC/dt = kC= -r , and the rate constant is 0.4 h^-1 .

What is the value of the energy stored in the inductor : Consider the following circuit with emf = 12 V, C = 2 microF, L = 6 microH, and R = 6ohms. What is the value of the energy stored in the inductor

Find the length of the studs in a rake wall with base height : Find the length of the studs in a rake wall with a 5:12 pitch, a half span of 9'4", 16" OC and a base height of 7'3".

Calculate the separation of the two slits : Young's experiment is performed with light of wavelength 502nm from excited helium atoms. What is the separation of the two slits

Find what depth of aggregate is needed at the angle theta : A 2000-lb wheel load is to be supported by aggregate over soil with a maximum bearing pressure of 1000 lb/sqft. What depth of aggregate is needed if the angle theta is 40 degrees

User Account

All Pages