Determine the rates of heat and moisture removal from air

Assignment Help Civil Engineering
Reference no: EM131033134

Air enters a window air conditioner at 1 atm, 32°C, and 70 percent relative humidity at a rate of 2m3/min, and it leaves as saturated air at 15°C. Part of the moisture in the air that condenses during the process is also removed at 15°C. Determine the rates of heat and moisture removal from the air.

Reference no: EM131033134

Questions Cloud

Explain how the source supports your working thesis : I need to write annotations for three sources. One needs to be a primary source. And then two secondary sources (need to be academic sources and come from peer-reviewed journals. The writing prompt that I chose is "Most often, literacy works have ..
Determine if the theater needs to be heated or cooled : The heat losses through the walls, windows, and the roof are estimated to be 130,000 Btu/h. Determine if the theater needs to be heated or cooled.
Prepare an acquisition analysis : Prepare an acquisition analysis and the consolidation journal entries necessary to prepare consolidated accounts for the year ending 30 June 2015 for the group comprising Koala Ltd and Kingfisher Ltd
Annotated bibliography about pyramids : You need to help me with my annotated bibliography about pyramids - How to build them, how they were built also what they are made of.
Determine the rates of heat and moisture removal from air : Part of the moisture in the air that condenses during the process is also removed at 15°C. Determine the rates of heat and moisture removal from the air.
Did american politics undergo sweeping transformations : Did American politics undergo sweeping transformations between the time of the Constitution and roughly 1840? Or did American politics remain essentially unchanged?
Develop a thesis exploring dracula from the excerpt of freud : Develop a thesis exploring Dracula from the excerpt of Freud's Civilization and its Discontents. 1. Your analysis of the novel must focus solely on the Freudian theory.
Determine the contribution of showers to the heat load : Taking the heat of vaporization of water to be 2450 kJ/kg, determine the contribution of showers to the latent heat load of the air conditioner per day in summer.
Identify any other complementary products in product line : Propose a branding strategy for your new product/service, including brand imagery and elements (name, term, symbol, design, etc.) to maximize consumer response and resonate with your chosen target market.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is concentration of fe needed to maintain concentration

At a wastewater treatment plant, FeCl3 (s) is added to remove excess phosphate from the effluent. Assume the following reactions occur: FeCl3(s) Fe3+ + 3Cl- Fe3+ + PO4 (3-) FePO4 The equilibrium constant for the second reaction is 10^26.4.

  Determine the probability that a failure is due to induced

Heart failures are due to either natural occurrences (81%) or outside factors (19%). Outside factors are related to induced substances (73%) or foreign objects (27%). Natural occurrences are caused by arterial blockage (56%), disease (27%), and infec..

  Determine the operating point on the pump characteristic

Determine the operating point on the pump characteristic curve when the flow is such that the pressure drop across the control valve is 35 kN/m^2

  Draw the influence line for the shear at point b

Draw the influence line for the shear at point B. Plot numerical values every 5 ft. Assume the support at A is a roller and C is fixed. EI is constant.

  Design temperature and residence time have been established

The oven exhaust gases are available at 250 F. Assume that the design temperature and residence time have been established as 1300 F and 0.6 sec, respectively. The type of burner used in the process requires outside air at a moass ratio of 12:1

  Draw the shear force and bending moment diagram

Consider a beam of length 1.5L(meters) with hinge support and roller support from both the ends (respectively left and right) at distance of L/4. The beam is subjected to triangular loading from 0 to q KNper meter.(left to right)

  What will be the steady state concentration of selenium in

If the farmer irrigates continuously, what will be the steady state concentration of selenium in the stream downstream from the farm (after the irrigation run-off returns to the stream)?

  Determine the magnitude of the couple which is applied

Three shafts and four gears are used to form a geartrain which will transmit 7.5 kW from the motor at A to a machine tool at F. (Bear- ings for the shafts are omitted from the sketch.) Knowing that the frequency of the motor is 30 Hz

  What will the concentration of megachlor be in four years

Magachlor is present in a lake having a volume of 20,000,000m3 that is used for drinking water. This waterbody can be considered well mixed. Megachlor can beconsidered a conservitive pollutant.

  Determine hydraulic retention time in the treatment system

The BOD5 of the influent wastewater is 150 mg/L and the first-order reaction rate for the degradation of BOD5 is 0.6/hr at 20°C. If the required effluent BOD5 is 20mg/L

  Calculate the critical depth of a circular concrete pipe

calculate the critical depth of a circular concrete pipe with a diameter of 42 inches, a Manning's Number of .014, a slope of .025% and a flow rate of 10 CFS (cubic feet per second). The radius is 3.55 and normal depth is 25 inches

  What annual volume savings will wastewater achieve

The Pomdeterra wastewater treatment plant produces thickened sludge that has a suspended solids concentration of 3.8%. They are investigating a filter press that will yield a solids concentration of 24%.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd