Determine the quality and the specific internal energy

Assignment Help Mechanical Engineering

Reference no: EM13708487

Refrigerant-134a at -12°C, in which 2.55kg of the refrigerant is in the liquid phase. An electric switch is turned on, and a 110-V source supplies current to a resistance heater inside the cylinder for a period of 20 minutes until the volume is doubled.

1. Determine the quality and the specific internal energy of the refrigerant at the initial state.

2. Determine the quality of the refrigerant and the pressure at the final state.

3. Sketch the process on a T-v diagram with respect to saturation lines.

4. Determine the work done during the process. Hence, or otherwise, determine the current that passes through the resistance heater

Reference no: EM13708487

Questions Cloud

What is the critical angle for wate : When a light ray passes from a material of higher n to a material of lower n (for instance, a light ray passing from glass to air), What is the critical angle for wate

Calculate the total distance moved : An object initially moving at 12 m/s accelerates uniformly to 33 m/s in 16 s. Calculate the total distance moved

Determine exit velocity and entropy production : Air enters a nozzle at 240 kpa and 400 k with a velocity of 10m/s. it exits at 100kpa. the nozzle adiabatic efficiency is 90%. Delta PE=0, s.s.s.f, uniform velocity at exit and entrance.

What is the angle of the refracted ray in the water : A ray of light in air strikes the surface of a pool of water at an angle of 30 degrees from the normal. What is the angle (measured from the normal) of the refracted ray in the water

Determine the quality and the specific internal energy : Refrigerant-134a at -12°C, in which 2.55kg of the refrigerant is in the liquid phase. An electric switch is turned on, and a 110-V source supplies current to a resistance heater inside the cylinder for a period of 20 minutes until the volume is doubl..

Estimate the potential difference across the capacitor : A 3.3-cm-diameter parallel-plate capacitor has a 2.5mm spacing. The electric field strength inside the capacitor is 1.1×105V/m. What is the potential difference across the capacitor

Calculate volume in each cylinder when piston reaches tdc : A four-stroke engine has a total displacement volume of 10L, 125mm bore and 16.3:1 compression ratio. The engine produces a maximum of 210 kW at 2100 RPM. The intake air is at 45 degrees C and 22.5 g/s of air flow into each cylinder. Calculate the vo..

Estimate what is the minimum rope tension required : A heavy sled is being pulled by two people as shown in the figure. The coefficient of static friction between the sled and the ground is µs = 0.627, what is the minimum rope tension required

How far away from the object does the image form : An object is placed 1.7 meters in front of a plane mirror, forming an image. How far away from the object does the image form

User Account

All Pages