Determine the prism constant

Reference no: EM13534537

1.To verify the constant of a particular prism, a straight line EFGis laid out. The EDM instrument is first set up at E, with the following measurements recorded: EG= 566.11m, EF=238.778 and FG=327.963m, Determine the Prism Constant

2.A 100 ft cut steel tape was used to check the layout of a building wall. the rear surveyor held 42 ft while the head surveyor cut 0.33 ft. what is the distance measured?

Reference no: EM13534537

Questions Cloud

What is the distance required to bring the train to a stop : The subway train is traveling at a speed of 54 km/hrwhen the brakes are fully applied on the wheels of cars B and C,causing them to slide on the track, but are not applied on car A.μ of kinetic friction= 0.35.

To verify the constant of a particular prism : To verify the constant of a particular prism, a straight line EFGis laid out. The EDM instrument is first set up at E, with thefollowing measurements recorded: EG= 566.11m, EF=238.778 and FG=327.963m, Determine the Prism Constant.

Determine the ground clearance of an overhead : Determine the ground clearance of an overhead electrical cable.surveyor B is positioned directly under the cable(surveyor B's position can be checked by his sighting past thesting of a plumb bob,held in his outstreched hand

Determine analytically whether or not it is linear : To prove that a system islinear or time-invariant, the property must be demonstrated for all possible input/output pairsand all delays. On the other hand, to prove that a system is not linear or not time-variant,the property can be demonstrated with ..

Determine the prism constant : A 100 ft cut steel tape was used to check the layout of a building wall. the rear surveyor held 42 ft while the head surveyor cut 0.33 ft. what is the distance measured?

How much must the temperature of the ring be increased : A steel ring of internal radius 499.8 mm is to be shrink-fitat normal (room) temperature over a rigid cylinder of radium r =500 mm

The horizontal distance between the point : The elevtion of M is 875 . a transit was set at point M and a leveling rod was held vertically at point N. the horizontal cross line of the telescope was inclined so the reading of the horizontal cross line

How are you to tell what the reynols number is : A rectangular concrete channel 4m wide on a slope of 0.002 is designed to carry water(T = 10 C) at discharge rate 25m^3/s. Estimate the uniform flow depth for these conditions?

How do you find this answer : A 14in diameter pipe pile is driven 50ft into a dry loose sandwhose unit weight is 105 pcf. The angle of internal frictionis 33 degrees. Compute the safe axial downward loading

User Account

All Pages