Determine the pressure variation in the flow field

Assignment Help Civil Engineering
Reference no: EM13312028

A plane flow field is developed by addition of a free vortex and a uniform stream in the positive x direction. If the vortex is located a distance a from the origin, find the pressure variation in the flow field. Express answer in terms of the uniform velocity V, the strength of the vortex, and the pressure po far from the origin.

Reference no: EM13312028

Questions Cloud

Find the magnitude of the net magnetic force : One component of a magnetic field has a magnitude of 0.070 T and points along the +x axis, Find the magnitude of the net magnetic force that acts on the particle
Determine what does the equation reduce to in steady flow : Define what each term in the equation means. Overall, what quantity is being conserved? Under what conditions might you be justified in assuming that non-linear terms are not important
How far will the spring stretch : When a 2.90 kg object is hung vertically on a certain light spring described by hooke's law, if the 2.90-kg object is removed, how far will the spring stretch if a 1.45 kg block is hung on it
Explain how many moles of reactants and products finished : The reaction of methane and water is a way to prepare hydrogen according to CH4 (g) + H2O = Co2 (g) + H2 (g) a) If 995 g of CH4 reacts with 2510 g of water, how many moles of reactants and products are there when the reaction is finished
Determine the pressure variation in the flow field : A plane flow field is developed by addition of a free vortex and a uniform stream in the positive x direction. If the vortex is located a distance a from the origin, find the pressure variation in the flow field.
Write down a formula for the force between them : The potential energy of two small particles in water is approximately: Write down a formula for the force between them
Write an object-oriented java program to manipulate data : I want a simple java solution matching all the specifications in the document. The java program has to be made using Eclipseversion 4.2.1.
Define the second listed reactant is the lewis acid : For each of the following reactions, identify which reactant is the Lewis acid. Select 1 if the first listed reactant is the Lewis acid or 2 if the second listed reactant is the Lewis acid
Find the top width of a v-notch capable of discharging : Find the depth and the top width of a v-notch capable of discharging a maximum of .7m^3/s and such that the head shall be 75mm for a discharge of 5.6 liters per second.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the time for the log to reach a speed

A truck is hauling a 300-kg log out of a ditch (20 degree incline) using a winch attached to the back of the truck. Knowing the winch applies a constant force of 2500N and the coefficient of kinetic friction between the ground and the log is 0.45

  Determine the unit strain developed in the concrete

a concrete test cylinder is loaded with p= 100k (445 kn) and resulting shortening of 0.036" (0.0914 mm). determine the unit strain developed in the concrete.

  Determine the actual detention time observed in the field

Determine the actual detention time observed in the field of two circular settling tanks with depth 3.5 m that was designed to have an overflow rate not exceeding 60 m3/m2-day and a detention time of at least 2 hour.

  Draw a mohrs circle and solve for max shear forces

You are given a mohrs circle with 10 kPa (assume positve since geotech question) in compression for sigmaz and 2 kPa (+ counterclockwise) force for shear z. This force lies on a plane 15 degrees CW.

  Determine what will be the new height of fluid column

A u-tube manometer is used to measure the pressure of a vessel under vacuum. Assume the manometer is open to atmospheric pressure (101.325 kPa) and the density of the fluid in the manometer is 12.0 g/cm3.

  Determine what design speed was used for the curve

A horizontal curve was designed for a four-lane highway for adequate SSD. Lane widths are 12 feet, and the superelevation is 0.06 and was set assuming maximum fx. If the necessary sight distance required 52 feet of lateral clearance from the roadw..

  How much calcium bicarbonate will need to be added per day

How much calcium bicarbonate (kg/day) will need to be added per day in water with alkalinity of 30 mg/L CaCO3 to prevent rapid pH decrease (assume for simplicity inly bicarbonate alkalinity is present) if 794 kg of Al2(SO4)3 x 18H2O

  Design horizontal curve with degree central angle for lanes

Design a horizontal curve with a 40-degree central angle (delta=40) for a two-lane road with 11-ft lanes. The design speed is 70 mi/h and superelevation is limited to 0.06ft/ft. Give radius, degree of curvature, and length of curve

  What would the gross truck mass when loaded to heap capacity

If a truck has a capacity of 24m^3 (Heaped) and 18m^3 (struck), with a total empty weight of 31600kg (truck), and needs to move soil at a density of 1850kg.m^3 (Bank) with a swell of 41%

  Determine what is the percentage yield of the reaction

The combustion of 52.8g of butane produces 104.0g of CO2. what is the percentage yield of the reaction

  Determine the amount of cover over a culvert

A vertical curve of 600 ft in length is used to connect two tangents with the following locations: Tangent 1.- Point 1, Sta = 59+00, El = 1250.0' Point 2, Sta = 72+00, El = 1190.0' Tangent 2.- Point 1, Sta = 72+00, El = 1190.0' Point 2, Sta = 84+0..

  Determine the force that should be developed in the cable

Determine the force that should be developed in the cable if the saddle keeps the pipe from sagging or deflection at its center. The pipe and fluid within it have a combined weight of 125lb/ft. EI is constant.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd