Determine the pressure in the vessel and the enthalpy

Assignment Help Mechanical Engineering

Reference no: EM13705332

Water is contained in a 0.2 m3 vessel at 200 C. The mass of water in the vessel is measured to be 2 kg. Determine (a) the pressure in the vessel, (b) the enthalpy, h, of the water in kJ/kg, (c) the mass and volume of vapor in the vessel.

Reference no: EM13705332

Questions Cloud

Determine the power required to drive the pump : A centrifugal pump draws water from a reservoir through a 4.0 in diameter pipe and delivers it to a 2.0 inch discharge pipe. A pressure gage on the discharge pipe is located 6.0ft above the free surface of the reservoir and reads 45psig.

Horsepower required to operate pump to discharge in tank : Water is pumped from a reservoir to a tank with a lift of 20.0 ft. The suction pipe, which connects the reservoir to the pump, has a 12in diameter and is 25ft long. The discharge pipe, which connects the pump to the tank, has a 10in diameter and is 4..

Laminar flow conditions-hydraulically-smooth horizontal pipe : Oil (p = 800 kg/m3 , u (mu) = 3.0 x 10^-3 kg/ms) is to be pumped at a rate of at least 6.3 x 10^-5 m3/s through hydraulically-smooth horizontal pipe with an equivalent length of 300 m. The pressure at the pipe inlet is 198 kPa (abs).

Demonstrate various page replacement algorithms : Demonstrate various page replacement algorithms - Calculate the number of page faults and display an output

Determine the pressure in the vessel and the enthalpy : Water is contained in a 0.2 m3 vessel at 200 C. The mass of water in the vessel is measured to be 2 kg. Determine (a) the pressure in the vessel, (b) the enthalpy, h, of the water in kJ/kg, (c) the mass and volume of vapor in the vessel.

What is the mass of air in the cylinder : The cylinder of a turbocharged diesel engine is filled with air at 30.0 psia and 250Â°F. When the intake valve closes, cylinder volume is 60.0 in3. The piston moves upward un-til cylinder volume is 4.00 in3, at which time pressure is 1100 psia. What ..

The acceleration of a particle is defined by the equation : The acceleration of a particle is defined by the equation a = -k*sqrt(v), where k is a constant. When t=0, the initial position is xo=0 and the initial velocity is vo=81ft/s. Knowing that v =36ft/s when x=18ft, determine the velocity of the particle ..

Determine how to best maximize the amount of net fixed asset : Analyze the accounting for each fixed asset class using US GAAP and IFRS and determine how to best maximize the amount of net fixed assets.

Change in internal energy of nitrogen in a process : Saturated liquid water at 1.0 MPa is inside a pistoncylinder device, which is heated until all of the water is vaporized. Find the amount of heat transfer needed for this process. Find the change in enthalpy and the change in internal energy of nitr..

User Account

All Pages