Determine the pressure at b in psig

Assignment Help Civil Engineering
Reference no: EM13562716

1.Water flows upward in a vertical 12" pipe at the rate of 7.85 cfs. At point A in the pipe the pressure is 30.5 psi. At B, 15 ft above A, the diameter is 24" and the lost head A to B equals 6 ft.

Determine the pressure at B in psig.

2.Oil (specific gravity 0.752) flows through a 6" horizontal pipe under a pressure of 60 psi. Assuming no losses, what is the flow in cfs if the pressure at a 3" diameter reduction is 20 psi?  

Reference no: EM13562716

Questions Cloud

A small parking lot at a neighborhood park has 5 parking : A small parking lot at a neighborhood park has 5 parking spaces, and the number of occupied slots at 9 AM is a binomial random variable, with p=0.75.  If vehicle arrivals at the lot follow a poisson process, with arrival rate lambda
Determine the magnitude and location of the resultant force : An open rectangular tanks is 3m wide and 4m long. The tank contains water to depth of 2m and oil (SG=0.8) on top of the water to a depth of 1m. Determine the magnitude and location of the resultant force acting on one end of the tank (i.e. 3m high by..
Calculate the difference in elevation from a to b : In trigonometric leveling from point A to point B, the slope distance and the zenith angle measured in A were 2504.897 m and 85o08’54”. At B, these measurements were 2504.891 m and 94o52’10” respectively
Compute a satisfactory curve length : A highway reconstruction project is being undertaken to reduce crash rates. the reconstruction project involves a major realignment of the highway such that a 60mi/h design speed is attained.
Determine the pressure at b in psig : Oil (specific gravity 0.752) flows through a 6" horizontal pipe under a pressure of 60 psi. Assuming no losses, what is the flow in cfs if the pressure at a 3" diameter reduction is 20 psi?
What was the intensity of the erthquaker : A city near the epicenter of an earthquake sustains major damage to poorly constructed building, althought hospital and schools designed to resist dmage from ground motion sustsain only minor damage.
What is the value of the kinetic coefficient of friction : A 2kg moves down a 45 degree incline at a constant velocity of .1m/s. What is the value of the kinetic coefficient of friction between the object and the incline?
Compute the effective normal stress and the shear stress : The water table is at a depth of 1 m. Compute the effective normal stress and the shear stress acting on a plane rotated 60 degrees clockwise from the horizontal at a depth of 2.5 m in this deposit.
What is the current rate at which water enters and leaves : Assuming that minimal water is lost due to evaporation and the total volume remains constant, what is the current rate at which water enters and leaves the San Vicente reservoir?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find allowable load p that can be supported by connection

A steel bar is attached to a wood support beam with four 20 mm diameter lag screws. The steel bar is 75-mm-wide by 6-mm-thick. For the steel bar, the yield strength is 260 MPa and the ultimate bearing strength is 350 MPa.

  What are the force and total time required

What is the weight of a 10-ft3 tank of oxygen if the oxygen is pressurized to 400 psia, the tank itself weighs 100 lbf, and thetemperature is 700F?

  How much of a reduction in terminal time would be required

Determine how many buses needed to provide service on the following route with the indicated characteristics:

  The change in length of the cable when the beam is under

A 4-m-long rigid beam is supported by a pinned connection and cable. the beam weighs 2.0 kn and hangs horizontally when unloaded When the beam is not loaded the solid cable is 4.00 m long and has a solid area of 175 mm1

  Calculate the coefficient of permeability of the soil

In a falling-head permeability test the initial head of 1.00 m dropped to 0.35 m in 3 h, the diameter of the standpipe being 5 mm. The soil specimen was 200 mm long by 100 mm in diameter.

  Calculate temp of interface between steel and isulation

A stainless steel pipe (k= 17 W/m?C) is being used to convey heated oil. The inside surface temperature is 130?C. The pipe is 2 cm thick with an inside diameter of 8 cm. The pipe is insulated with 0.04 m thick insulation

  Determine direction and magnitude of hydraulic gradient

Piezometer A is located 3000 feet due south of piezometer B. Piezometer C is located 2000 feet due west of piezometer B. The surface elevations of A, B and C are 480, 610 and 545 feet respectively. The depth to water in A is 40 feet, in B is 140 f..

  Describe how the speed of sound varies over the range

An important dimensionless parameter concerned with very high-speed flow is Mach Number, defined as V/c, where V is the speed of the object such as airplane or projectile, and c is the speed of sound in the fluid surrounding the object.

  How does cavitation affect the operation of the pump

Sometimes driving your car on a hot day, you may encounter a problem with the fuel pump called pump cavitation. What is happening to the gasoline. How does this affect the operation of the pump.

  Draw a small sketch that shows a situation

Name three types of metamorphic foliations, and draw a small sketch that shows a situation where a metamorphic foliation could cause problems in an excavation.

  Find the piles design capacity if the factor of safety is 2

A 12-in. square concrete pile is driven into clay to a depth of 40 feet. Unit weight is 115 pcf, and qu is 2000 ksf. Find the pile's design capacity if the factor of safety is 2.

  Determine the force members bc, fc, and fe

Determine the force members BC, FC, and FE, and state if the members are in tension or compression.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd