Determine the power required in hp to heat the house using

Assignment Help Mechanical Engineering

Reference no: EM13631072

A building for which the heat transfer rate through the walls and roof is 1350 Btu/h per degree temperature difference between the inside and outside is to be maintained at 70 degrees F. For a day when the outside temperature is 37 degrees F, determine the power required, in hp, to heat the house using electrical resistance elements and compare with the minimum theoretical power that would be required by a heat pump. Repeat the comparison using typical manfacturer's data for the heat pump coefficient of performance (typical COP range is 2-3).

Reference no: EM13631072

Questions Cloud

A small leak occurs in one of the window seals in the : an airplane is cruising at an altitude of 10 km. the pressure outside the craft is 0.311 atm within the passenger

If the design load on the prototype is 500 n what will be : the drag on a 2-m. diameter satellite dish in an 80 kmhr wind is to be determined by a wind tunnel test using a

The piston rises to a new position doing 100 j of work on : a cylinder with a movable piston contains a gas. initially the gas temperature is 25 c. a two stage process happens. in

Tests on a geometrically-scaled model elbow will use water : a prototype 90 degree pipe elbow has ethyl alcohol at 20 degrees celsius flowing through it. the pressure drop through

Determine the power required in hp to heat the house using : a building for which the heat transfer rate through the walls and roof is 1350 btuh per degree temperature difference

Determine the maximum thermal efficiency for any power : ocean temperature energy conversion otec power plants generate power by utilizing the naturally occurring decrease with

At what frequency does the inductive reactance of a 820 : at what frequency does the inductive reactance of a 82.0 microh inductor equal the capacitive reactance of a 82.0

Derive an expression for the intermediate temperature t in : two reversible power cycles are arranged in series. the first cycle receives energy by heat transfer from a reservoir

Determine the maximum deflection angle in degrees obtained : as a first step towards analyzing oblique shock waves in hypersonic flow consider the limiting case of infinite mach

User Account

All Pages