Determine the power produced at 2 pm on december

Assignment Help Electrical Engineering
Reference no: EM13288838

Determine the power produced at 2 PM on December 21st from a 10 square meters south facing solar array oriented at 45 degrees from horizontal and located in Atlanta , GA. Use nominal efficiency data for single crystal silicon solar cells.

Reference no: EM13288838

Questions Cloud

Explain the rate at which the condensate drips off : Saturated steam at 1 atm condenses on a vertical plate which is maintained at a temperature 99 C. If the rate of heat transfer by condensation is 180 KW, determine the rate at which the condensate drips off the plate at the bottom.
How much work is done on the rail car : rail car that weighs 43 N is accelerated at 8.9 m/s/s for 4.5 seconds. How much work is done on the rail car
Determine source resistance required in the gate circuit : The trigger circuit of thyristor has sourcevoltage of 17V and load line has slope of -120V per ampere. The minimum gate current to turn on the SCR is 24mA. Find source resistance required in the gate circuit
Obtain the magnitude of the force on the wire : A solenoid is constructed having 350 turns of wire and is 62.0 cm in length. A single hanging wire is positioned vertically at the end of the solenoid, what is the magnitude of the force on the wire
Determine the power produced at 2 pm on december : Determine the power produced at 2 PM on December 21st from a 10 square meters south facing solar array oriented at 45 degrees from horizontal and located in Atlanta , GA. Use nominal efficiency data for single crystal silicon solar cells.
Explain the approaches how covalent modification : Describe the general approaches that are used to determine the mechanism of catalysis of an enzyme. Include in the approaches how covalent modification
Determine what would the output voltage of the dac be : A 1.0000 V signal is converted to an 8-bit binary signal throughand ADC. The signal is then fed back into an 8-bit DAC. assummingthat both ADC and DAC range from 0 to 5.0 V, what would the outputvoltage of the DAC be
Explain what mass of water forms from the reaction : What mass of water (in grams) forms from the reaction of 2.66 L of hydrogen gas and 2.06 L of oxygen gas. Both gases are at 759 torr and 7.9 oC.
Determine what is the signal power delivered to the load : An amplifier produces a sinusoidal signal of 8.5V peak acrossa 50-ohm resistive load. the amplifier is powered from a 12Vvoltage source. a) What is the signal power delivered to the load

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find energy in ev of the emitted electrons from the surface

The photoelectric threshold wavelength for Tungsten is 2300 Å. Find the energy in eV of the emitted electrons from the surface by ultraviolet light of wavelength 1800 Å.

  Modify very simple cpu to incorporate a new 8-bit register

modify the Very Simple CPU to incorporate a new 8-bit register,R, and two new instructions. MVAC performs the transfer Râ†AC and has the instruction code 1110 XXXX; MOVR performs the operation ACâ†R and has the instruction code 1111 XXXX.

  Explain radio systems

Radio Systems, In design of radio systems that incorporate wireless networks, considerations must be taken such as user access, transmission direction, switching and signal strength.

  What is the input voltage and output voltage

A transformer is used to match an 8 ohm speaker to a 500ohm audio line. What is the turns ratio of the transformer what is the input voltage and output voltage when 15W is being delivered to the speaker

  Find the output voltage

A temperature sensor has a static transfer function of 0.15 mV/C° and a time constant of 3.3 s. If a step change of 22° to 50° C is applied at t=0, find the output voltage at 0.5 s from t=0s to t=10s

  Determine the electrostatic potential v at a point

A circular line charge of uniform line charge density q(C/m) is located in z=0 plane with its center at the origin. Determine, a. The electrostatic potential V at a point along the z-axis (0, 0, z) b. The electrostatic field E a point along the z-axi..

  Find the excitation equation for the d flip-flop

A sequential circuit has two inputs (A and B) and contains one D flip-flop that has only D and clock inputs. If A = B the flip-flop is unchanged, otherwise the flipflop is complemented. Find the excitation equation for the D flip-flop

  Find what is the probability of three heads

An experiment consists of tossing a fair coin four times in succession. What are the possible outcomes Now count up the number of outcomes with three heads. If the outcomes are equally probable, what is the probability of three heads

  Find the per unit length inductance of the transmission line

A lossless transmission line is embedded in a medium having a dielectric constant of 9. The per-unit length capacitance of the line is given as 100 pF/m. a.Find the wave velocity in the medium.

  Compute all sum bits usingthe a fo rementioned carry bits

How many time units would youneed to compute all the carry bits and why. Compute all the sum bits usingthe aforementioned carry bits. How many time units would you needto complete the addition process and why.

  Twenty voice signals are to be multiplexed and transmitted

Twenty voice signals are to be multiplexed and transmitted over twisted pair. What is the bandwidth required (in bps) if synchronous time division multiplexing is used

  Find resonant frequency fo of ckt for reverse bias voltage

The doping concentrations in a silicon pn junction are Nd = 5 × 1015 cm^3 and Na = 1017 cm^3. The zero-bias junction capacitance is Cjo = 0.60 pF. An inductance of 1.50 mH is connected in parallel with the pn junction.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd