Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
1. Explain why pipe diameter rather than pipe length is the proper characteristic scale for Reynolds number in a pipe.
2. You have a block of steel 10cm x 10cm x 4cm. You drill 81 holes through the 4cm dimension of the block. The holes are on a 9x9 square grid with 1 cm spacing. The diameter of each hole is 1mm.
a- Determine the porosity and permeability of the block.
b- In a second block, you drill a single larger-diameter hole, so that the porosity is the same as your first block. What is the diameter of the hole? What is the permeability of the second block?
a pipeline terminates in a nozzle of outlet diameter 0.15 m. the free jet from the nozzle is deflected through
given bulk density as 1300kg/cubic meter and field capacity as 22% by weight and permanent wilting point as 10% by weight calculate available water capacity.
Motor M draws in the cable with an acceleration of 4 , measured relative to the 220 mine car. Determine the acceleration of the car. Neglect the mass of the pulleys.
A 1m thick layer of this soil is packed so that it is as loose as possible (void ratio, e_max ~= 0.9), and then it was vibrated until it was as dense as possible (void ratio, e_min ~= 0.35).
The acceleration of a particle is defined by the relation a=-8m/s^2. Knowing that x=20m when t=4s and that x=4m when v=16m/s, determine (a) the time when the velocity is zero, (b) the velocity and the total distance traveled when t=11s.
Write about a construction such as a single building or a public gathering place or a recreational place keeping in mind the idea of reducing fossil fuel consumption and to reduce the carbon footprint of the building.
The beam ABC of length L has two different moments of inertia (2I in AB, I in BC) and a constant elastic modulus E. It is fixed at point A has a roller support at point B and a load P at C. a. Sketch the deflected shape of this beam.
What is the equation for average vehicle delay Is it averge queue over arrivals Average queue over average arrivals
A tensile load of 50 000 lb is applied to a metal bar with a 0.6x0.6 in cross section and a gage length of 2 in. Under this load the bar elastically deforms so that the gae length increases to 2.007 in
A carpenter uses a hammer to strike a nail. Approximate the hammer's weight of 1.8lbs, as being concentrated at the head, and assume that at impact the head is traveling in the -j direction
groundwater is pumped for domestic use from an unconfined aquifer. the thickness of the clay is 40%. after 10 years of pumping, the porosity is reduced to 30%. determine the subsidence of the clay surface.
An industrial waste water treatment plant discharges into a large river. the industrial waste water is at 1m^3/s and contains an ultimate BOD concentration of 300mg/L at a temperature of 30 degrees C and a DO concentration of 2.5mg/L
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd