Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Assume that a 5 mile long feeder is supplying a 2000 kVA load of increasing load density starting at a substation. If the K constant of the feeder is given as 0.00001%VD per kVA·mi, determine the following:
(a) The percent voltage drop in the main.
(b) Repeat part (a) but assume that the load is a lumped-sum load and connected at the end of the feeder
(c) Repeat part (a) but assume that the load is distributed uniformly along the main.
A 1 lb weight is suspended from a 0.005 in diameter wire. The unstrained resistance of the wire, R0, is 270 ohm, and its unstrained length is L0=36 in. The wire's gauge factor is 3.2. a. Calculate the psi tensile stress on the loaded wire.
The heavy-duty rechargeable battery you selected can provide a continuous 9A of current at 12 V for a 4-hour period of operation each night before being completely drained.
What is the resolution of an ADC with a word length of 12-bits and an analogue signal input range of 100 V A sensor produces a maximum analogue output of 5V. What word length is required for an ADC if there is to be a resolution of 10mV
A six pole, 40 kW, 400 V d.c. motor draws 110 A from the supply. The shunt field resistance is 200 Ohm and the armature resistance is 0.5 Ohm. The armature is wave wound with 600 conductors operates at a speed of 1200 rev/min when supplying full l..
A finite state machine has one input (X) and two outputs (Z1 and Z2).An output Z1=1 occurs every time the input sequence 101 is observed,provided the sequence 011 has never been seen. An output Z2=1occursevery time the input 011 is observed.
the inner conductor has a radius of a=2cm theradius of the outer conductor is 4cm, and the length of thecylinder is l=6cm. assuming no field fringing and free spacebetween the conductors and neglecting fringing, findA.the electric field intensity ..
Using the Matlab commands fir1 and freqz, construct a FIR digital bandpass filter with cut-off frequencies of 150 and 300 Hz for a signal with a sampling frequency of 1000 Hz and 512 sampled points. Let the order of the filter be 10, and then increas..
For a kernel that consumes 90% of execution time, what speedup for the kernel would be required to achieve an overall speedup of 5?
need answer for q1q2 and q10 asap in one hour ltbrgt ltbrgt ltbrgt ltbrgt ltbrgt ltbrgt ltbrgt ltbrgt ltbrgt ltbrgt
Suppose that V1 (t)=100cos(ωt) and V2 (t)= 100sin(ωt). Use phasors to reduce the sum Vs (t)=V1 (t)+V2(t) to a single term of the form Vm cos(ωt+θ). Draw a phasor diagram, showing V1, V2 ,and Vs. State the phase relationships between each pair of t..
Calculate the resistance of the ring, using a value of 3.3 x 10^(-8) ohm/m for the resistivity of the aluminum, and from it, find the current in the ring.
salut a tous je suis eacutetudiant en fin de cycle option eacutelectromeacutecanique et je voulais savoir les
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd