Determine the peak magnetic field strength

Reference no: EM13272743

Assume the mostly infrared radiation from a heat lamp acts like a continuous wave with wavelength 1.50 µm.

(a) If the lamp's 215 W output is focused on a person's shoulder, over a circular area 25.0 cm in diameter, what is the intensity?

kW/m2

(b) What is the peak electric field strength?

kV/m

µT

(d) How long will it take to increase the temperature of the 4.00 kg shoulder by 2.00°C, assuming no other heat transfer and given its specific heat is 0.830 kcal/kg·°C?

Reference no: EM13272743

Questions Cloud

Explain the temperature change of an aluminum : A student follows the procedure for his experiment and burn a peanut. The peanut weighed 0.780 g before combustion and 0.054 g after combustion. The temperature change of an aluminum can be filled with 200 mL of water was 15.3 degree Celsius. (Den..

Design an inverting singe stage low pass filter with gain : Design an inverting singe stage low pass filter with gain = 40 dB, Rin = 10 kΩ , corner frequency of 50 Hz. Determine the max and min gain and the corne frequency for the component tolerances of 5%/ Plot gain vs frequency (Hz) with frequency on a ..

Write an expression for the frequency response of the sensor : Consider a thermal sensor that a time constant τ = 20 msec such that a step change in temp. requires approx. 3*τ to reach 95 % of the final value. a- write an expression for the frequency response of the sensor

What is the electric field needed to support drift current : Suppose a drift current density of 2000 A/cm^2 exists in the neutral region on the n-type side of the diode that has a relationship of 0.5 Cm. What is the electric field needed to support this drift current density

Determine the peak magnetic field strength : If the lamp's 215 W output is focused on a person's shoulder, over a circular area 25.0 cm in diameter, Find the peak magnetic field strength

How can one go about to decode a message from a wav file : how can one go about to decode a message from a wav file. the wave contain a coded message in form numbers. which is represented in the wave in form of tones

Explain what would be the percent recovery of the solid : If a sample that is 1.200g in 25.0mL of heptane is cooled to 0 degrees C, what would be the percent recovery of the solid that would be collected? (M.P.=80 degrees C)

What is diff of having op-amps with different amount of pole : What is the different of having op-amps with different amount of poles, as an example some one come to you and offer you this new opamp, but this person tell you that this op-amp jus have two poles in its open loop response

What must be the density of the oil : You are designing a machine for a space exploration vehicle. It contains an enclosed column of oil that is 1.05m tall, What must be the density of the oil

User Account

All Pages