Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A polystyrene rod consisting of two cylindrical portions AB and BC is restrained at both ends and supports two 6 kip loads. Knowing that E = 0.45 * 10^6 psi, determine the normal stress in each portion of the rod.
A cylindrical rod of brass alloy (E = 100 GPa,) having a yield strength of 345 MPa is to be subjected to a load of 7500 N. If the length and diameter of the rod are 338 mm and 7.55 mm respectively, what must be the allowable elongation
If both tanks are well-mixed and remain at constant volume, what is the steady-state concentration (in mg/L) of chromate (CrO42-) in the effluent water leaving the second tank?
A small truck is to be driven down a 4% grade at 70mi/hr. The coefficient of road adhesion is 0.95, and it is known that the baking efficiency is 80% when the truck is empty and decreases by one percentage point for every 100 lb of cargo added.
A 3000 lb vehicle has a drag coefficient of 0.32 and a frontal area of 30 ft2. What is the minimum tractive effort required for this vehicle to maintain a 65 mph speed on a 2% upgrade through an air density of 0.002045 slugs/ft3
An equal-tangent crest vertical curve is designed with a PVI at station 110+00 and a PVC at station 107+43.3. if the high point is station 110+75.5 what is the design speed of he curve?
A first order reaction occurs in a PFR at the rate of 2.1 hr^-1. The reactor volume is 1400L and flow is 15 gpm. If the influent concentration is 200 mg/L, then what is the effluent concentration
The Pomdeterra wastewater treatment plant produces thickened sludge that has a suspended solids concentration of 3.8%. They are investigating a filter press that will yield a solids concentration of 24%.
A frictionless piston-cylinder contains 2kg of nitrogen at 100 kPa absolute and 300 deg K. The system is compressed polyprotically at a 1.4 exponent (n) until the nitrogen reaches a final temperature of 360 deg K.
An unknown fluid flows through a horizontal 35-mm-diameter pipe with a Reynolds number of 100,000 and a density of 680 kg/m3. The pressure drop across a 21-mm-diameter nozzle meter placed in the pipe is 4.2 kPa.
Nitrogen is compressed from 80 kPa and 27?C to 480 kPa by a 10-kW compressor. Determine the mass flow rate of nitrogen through the compressor, assuming the compression process to be (a) isentropic
What will the freeway's density and level of service be before and after the ban? (Assume that the trucks are removed and all other traffic attributes are unchanged)
A minimum contact time of 30 min is required to reduce the pathogen concentration from 100 pathogens/L to below 1 pathogen/L through a first- order decay process. You plan on treating water at a rate of 1,000 gal/min.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd