Determine the normal and shear stresses acting on an angle

Assignment Help Civil Engineering
Reference no: EM13308050

A pressurized steel tank has a radius r=0.6m, a wall thickness t=18mm and an internal pressure p of 2.8 MPa.The steel has a modulus of elasticity E of 200 GP and a poissons ratio 0.30. Determine the hoop and axial stressses. Deteremine the maximum in-plane and out-of-plane shhear stresses.Determine the hoop and axial strains. Determine the normal and shear stresses acting on an angle of 35 degrees.

Reference no: EM13308050

Questions Cloud

Business of importing and supplying jewellery as wholesaler : Andrew, Brian, Colin, Diana and Elizabeth were the directors of Gemsales Pty Ltd, a company engaged in the business of importing and supplying jewellery as wholesalers to the local market.
How far behind is the first car : Two cars are initially at rest at the starting line of a 100-m long track. the first car accelerates at a rate of 2.50 m/s^2. how far behind is the first car
State a c program that opens the file : Write a C program that opens the file and firstly stores all the values in an appropriately declared two-dimensional array of integers. It then should analyse this array to find (from the 40 input values) the total number of coursework marks in the..
Determine the maximum stress and strain in the ball : A rubber ball is inflated to a pressure of 65 kPa .At that pressure the diameter of the ball is 240mm and the wall thickness is 1.25 mm.The rubber has a modulus of elasticity E of 3.6 Mpa and a poisoon'd ratio of 0.48.
Determine the normal and shear stresses acting on an angle : A pressurized steel tank has a radius r=0.6m, a wall thickness t=18mm and an internal pressure p of 2.8 MPa.The steel has a modulus of elasticity E of 200 GP and a poissons ratio 0.30.
Determine the minimum thickness t of the wall of the tank : A cylindrical tank having a diameter d=2.5 inches is sunjected to internal gas presuure p=600 psi and an external tensile load T=1000 lbs. Determine the minimum thickness t of the wall of the tank
What is the maximum internal pressure in cylindrical vessel : The maximum hoop stress is (65000/2) psi and the maximum shear stress is 16000 psi. If the diameter of the tank is 7 inches,what is the minimum wall thickness.
Find the position vector of the projectile : A projectile is shot from the edge of a cliff 125 m above the ground level with an initial speed of 65.0 m/s at an angle of 37 degree above th horizontal. find the position vector of the projectile when it reaches it maximum height above the top of..
Describe the new product : Describe the new product.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What total allowable bod kg per day could be discharged

A 5000 m3/day wastewater treatment plant discharges to a river with a minimum drought flow of 140 m3/min (upstream of outfall) a)What total allowable BOD (kg/day) could be discharged by the plant if the BOD in the river after initial dilution must ..

  Case study-disaster identifying safety management

Conduct a Case Study on this disaster identifying safety management, safety audits, accident investigation, and industrial hygiene issues. Your Case Study should be a minimum of 500 - 600 words and contain the components listed above.

  How many trips would one rubber-tired herrywampus have

How many trips would one rubber-tired Herrywampus have to make to backfill a space with a geometrical volume of 5400 cubic yard. The maximum capacity of the machine is 30 cubic yard (heaped), or 40 tons.

  Determine the velocity and acceleration of block b

Determine the velocity and acceleration of block B and determine the velocity and acceleration of Car A relative to Car B.

  Determine what is the void ratio and the specific gravity

For a same soil, two moist densities and their corresponding degrees of saturation are given in the following table Density (kg/m^3) S(%) 1700 55 1800 70 What is the void ratio (e) and the specific gravity (Gs)?

  Determine the factors of safety against sliding

assume hydrostatic uplift varies uniformly from full hydrostatic head at the heel of the dam to zero at the toe. consider 1m length of dam.

  Would recycle of return sludge increase the sludge age

if the sludge concentration in the return sludge line from the secondary clarifier were the same as the MLVSS concentration.WOULD recycle of return sludge increase the sludge age why

  Estimate the storage change for the lake during the month

A lake with a surface area of 1050 acres was monitored over a period of time. During a one month period, the inflow was 33 cfs, the outflow was 27 cfs, and a 1.5 in seepage loss was measured.

  Embankment for a highway

An embankment for a highway 30m wide & 1.5m in a compacted thickness is to be constructed from a sandy trucked from a borrow pit. the water contenet of the sandy soil in the borrow pit is 15%& its void ratio is 0.69.

  What do will result if the concentration of waste is reduced

The discharge from a sugar beet plant causes the DO at the critical point to fall to 4.0 mg/L. The stream has a negligible BOD and the initial deficit after the river and wastewater have mixed is zero.

  What should be the new volume of the lake

Suppose that the distance from the lake outlet to the withdrawal cannot be more than 20 mi. What should be the new volume of the lake?

  Determine the magnitudes of force

The beam is to be hoisted using two chains. Determine the magnitudes of force and acting on each chain in order to develop a resultant force of 500 directed along the positive axis. Set = 41

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd