Determine the most efficient cross section with a bedslope

Assignment Help Civil Engineering
Reference no: EM13314001

An open channel with a trapezoidal configuration with side batters 1V:3H is to be designed to carry 1.0m^3/s with a bedslope of 0.0065. The channel is lined with concrete with manning's n of 0.011. Find the most efficient cross section.

Reference no: EM13314001

Questions Cloud

Determine max pressure at bottom of gate 2 : Find max pressure at bottom of gate (psi) 2. Total horizontal force on gate 3. moment about the bottom of the gate
Define the extracton mixture of naphthalene and benzoic acid : In the extracton mixture of naphthalene, benzoic acid, ethyl p-aminobenzoate: what form is the organic base and organic acid after extracted into aqueous phase
Determine the mass of the block : In the above animation a massive block is attached to a spring. It is sliding back and forth on a frictionless table. The spring has a spring constant 250 N/m. Determine the mass of the block
What is difference between a state graph and a search tree : Describe how the problem of traveling from one city to another could be framed as a production system. What are the states? What are the productions?
Determine the most efficient cross section with a bedslope : An open channel with a trapezoidal configuration with side batters 1V:3H is to be designed to carry 1.0m^3/s with a bedslope of 0.0065. The channel is lined with concrete with manning's n of 0.011.
Calculate the speed of the skater : A 75kg skater starts at a height of 6m above ground, the speed at the lowest point of the track is 10.84 m/s^2. Calculate the speed of the skater
At which angle will the photon scatter : At which angle will the photon scatter with respect to its original direction? (The accepted unit abbreviations for angles are either 'deg' for degrees or 'rad' for radians.)
Determine the natural frequencies and the natural modes : Consider the rocket on a test stand . The nose of the rocket is fixed. The rocket is of length L, constant EA and constant m, mass per unit length. To investigate longitudinal dynamics, the rocket is modeled using axial elements of equal length.
Explain the transition-metal ions that have the electron : Draw energy level diagram to show the low- and high spin octahedral complexes of the transition-metal ions that have the electron configurations d4 d5 d6 and d7

Reviews

Write a Review

Civil Engineering Questions & Answers

  Evaluate the acceleration along and normal to the path

The velocity along a pathline is given by V (m/s) = s^2 x t^(1/2) where s is in meters and t is in seconds. The radius of curvature is 0.5 m. Evaluate the acceleration along and normal to the path at s = 2m and t = 0.5 seconds.

  Estimate the power the device can produce at a wind speed

The U.S. Department of Energy (DOE) constructed a Darrieus vertical-axis wind turbine in Sandia, New Mexico. The machine is 60.0-ft tall and 30.0-ft in diameter, and swept an area of 1200 ft 2.

  How the design engineer has decided to support on a system

According to a settlement analysis, the weight of this fill will cause 600 mm of the total settlement over a period of 30 years. The differential settlement will probably be about 100mm. Although the building could be supported on spread footing f..

  Horizontal motion of plunger and shaft

The horizontal motion of plunger and shaft is arrested by resistance of the attached disk which moves through the oil bath. If the velocity of plunger is v.

  What is the minimum tractive effort required for vehicle

A 3000 lb vehicle has a drag coefficient of 0.32 and a frontal area of 30 ft2. What is the minimum tractive effort required for this vehicle to maintain a 65 mph speed on a 2% upgrade through an air density of 0.002045 slugs/ft3

  Determine the force exerted on the cable by the man

The beam is in equilibrium with the man standing at the end and pulling on the cable. Determine the force exerted on the cable by the man and the reactions at pinned support C.

  How to use design chart for r for grade 60 reinforcement

Select the number and size of reinforcing bars required to resist a total factored moment of 180 ft. kips for a rectangular section with b = 12 in., d = 19.5 in., h = 24 in., f'c = 4 ksi, and fy = 60 ksi.

  Determine the volume of water infiltrated on the field

a 30-acre field received 4 inches of rain with 35% runoff.Determine the volume of water infiltrated on the field ( assume all the water that doesn't runoff infiltrates )

  Determine water pressure-pressure head and elevation head

For each of the two cases below, determine the water pressure, pressure head, elevation head, and total head at points A, B, and C. Please solve the problem using: (a) the upper reservoir level as the datum

  What is the reason for the relatively high strength of wood

what is the reason for the relatively high strength of wood in the longitudinal direction of the tree trunk as compared to the transverse direction

  Calculate the surface area and hydraulic retention time

Calculate the surface area (m2), diameter (m), volume (m3), and hydraulic retention time of a 3 m deep circular, primary clarifier that would remove 50 percent of suspended solids. Assume the surface overflow rate (SOR) used for design is 60 m3/m2-..

  How many 34-inch diameter rivets are required to transmit

How many 34-inch diameter rivets are required to transmit 55,000 lb from the two angles to the gusset plate if the allowable shear stress in the rivets is 15,000 psi. Assume each rivet carries the same amount of load.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd