Determine the mole fraction of the water vapor in the air

Assignment Help Civil Engineering
Reference no: EM131035894

Consider a glass of water in a room at 27°C and 97 kPa. If the relative humidity in the room is 100 percent and the water and the air are in thermal and phase equilibrium, determine (a) the mole fraction of the water vapor in the air and (b) the mole fraction of air in the water.

Reference no: EM131035894

Questions Cloud

Business start-up successes and failures states : Business Start-Up Successes and Failures states, "over the most recent ten-year period for which data are available, new business start-ups numbered between 700,000 and 900,00 per year. What are some of the reasons entrepreneurs / small businesses fa..
Determine the equilibrium composition of the mixture : A mixture of 2 mol of H2O and 3 mol of O2 is heated to 3600 K at a pressure of 8 atm. Determine the equilibrium composition of the mixture, assuming that only H2O, OH, O2, and H2 are present.
Determine the mole fraction of argon : Determine the mole fraction of argon that ionizes according to the reaction Ar ? Ar+ + e -at 10,000 K and 0.35 atm (KP = 0.00042 for this reaction).
Determine the mole fraction of the water vapor in the air : Consider a glass of water in a room at 27°C and 97 kPa.
What are the risks and benefits of waiting : What are the risks and benefits of waiting until they had been granted patents to ask for customer feedback? Explain in detail using sources and research. Use credible sources to support and explain.
Determine the molar and mass density of nitrogen : Consider a rubber plate that is in contact with nitrogen gas at 298 K and 250 kPa. Determine the molar and mass density of nitrogen in the rubber at the interface.
Determine the composition of each phase : Using the liquid-vapor equilibrium diagram of an oxygen-nitrogen mixture, determine the composition of each phase at 80 K and 100 kPa.
Advantages and disadvantages of index numbers : What are the advantages and disadvantages of index numbers

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the thickness of the laminar sublayer

For the fully developed flow of water in a smooth 0.15-m pipe at a rate of 0:006m3/s, determine the thickness of a. the laminar sublayer; b. the buffer layer; c. the turbulent core.

  Value for portb after the execution

Find the value for PORTB after the execution of the following code:

  Determine the soils coefficient of permeability during test

The head difference between manometer levels was 4.9 cm during the test, and the water temperature was 20 degrees celcius. If it took 152 second for 500 ml of water to discharge, determine the soil's coefficient of permeability.

  A ferric chloride dosage of 40 mg/l and an equivalent dosage

A ferric chloride dosage of 40 mg/l and an equivalent dosage of lime are used to coagulate a water.

  Determine what pressure head is needed from the pump to

A WTP Operator is trying to size a pump that takes water from a WTP holding tank and sends it to a house on a hill above the plant.  The operator's goal is to have 60 psi of water pressure entering the house.

  Derive the equation of motion

For the beam shown be low, derive the equation of motion in the ∞- and y-directions. Recall that the deformation of a bar along its axis

  Calculate the surface area of a rectangular

How will calculate the surface area of a rectangular open trench Length=100 mtr,Width=.6mtr,Depth= .75mtr.

  Select a hydraulic pump size and a hydraulic cylinder size

Hydraulic cylinders with a stroke of 72 inches are available with bore sizes from 2 o 8 inches. Hydraulic piston pumps with an operating pressure range from 200 to 3000 psig are available with pumping capacities of 5, 10, and 15 gallons per minute..

  How far does a horizontal plane depart from a level surface

The width of a lake is 16 km (it is a flat plane tangent to the radius of the sphere). How far does a horizontal plane depart from a level surface if the earth is a sphere with r=6371km?

  Compute nominal compressive strength for a500 grade b steel

An HSS 10×8×3?16 is used as a compression member with one end pinned and the other end fixed against rotation but free to translate. The length is 12 feet. Compute the nominal compressive strength for A500 Grade B steel

  What is the maximum height

The height (in meters) of a projectile shot vertically upward from a point 2 m above ground level with an initial velocity of 24.5 m/s is h2+24.5t-4.9t^2 after t seconds. a) When does the projectile reach its maximum height? b) What is the maximum..

  Calculate the stoichiometric quantity of cl2 required

Aqueous sodium cyanide wastes at a metal processing industry are to be treated with chlorine and NaOH. Calculate the stoichiometric quantity of CL2 required daily to destroy the cyanide from 5 Kg of NaCN.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd