Determine the minimum temperature in the cycle

Assignment Help Civil Engineering
Reference no: EM13563804

A reversed brayton cycle operates with air entering the compressor at 1 bar and 7 c and leaving at 4 bars air enters the turbine at 37 c the compressor and the turbine efficients are 84% and 88% respectivelt determine

a-the minimum temperature in the cycle

b-the cofficient of performance

c-the mass flow rate for 211 kj/min of cooling

Reference no: EM13563804

Questions Cloud

What is the tension force in the bolts holding the bend : When a plastics plant is redesigned, a tank exit is now facing the wrong direction and must be connected to a pipe of diameter D=0.2 m with a180o bend in a horizontal plane.
Determine the final maxture dry bulb temperature and its : One atmospheric air stream at 15 c and 30 percent relative humidity is mixednadiabatically with another air stream at 30c and 70 percent relative humidity in a steady flow process if the mass flow rate of the dry air in the hot stream
Determine the heat removed in the cooling process : Atmospheric air at 1.01 bar 30 c and 60 percent relative humidity flows over a set of cooling coils at an inlet flow rate of 1500 m^3/min the liquid which condeness is removed from the system at 17 c subsequent heating of the air results in the final..
Determine the exit temperature : A mixture by volume of 50% hydrogen and 50% carbon dioxide is flowing isentropically through a nozzle with flow rate of 1 m^3/s measured at inlet condition of 700 kpa and 373k the inlet velocity is negligible and the mixture expands to a pressure of ..
Determine the minimum temperature in the cycle : A reversed brayton cycle operates with air entering the compressor at 1 bar and 7 c and leaving at 4 bars air enters the turbine at 37 c the compressor and the turbine efficients are 84% and 88% respectivelt determine
Estimate the value of the fuel that is captured if the vapor : Gasoline vapors are vented to the atmosphere when an underground gasoline storage tank is filled. If the tanker truck discharges into the top of the tank with no vapor control
Compute and tabulate the azimuths from the following 3-sided : Compute and tabulate the azimuths from the following 3-sided traverse where course ab is due north. angles are to the right. include a sketch.
Determine the work done and the heat transfer : Water, initially dry saturated vapour at 4 bar, lls a closed rigid con- tainer. The water is heated until its temperature is 400C. Determine the work done and the heat transfer.
What is the concentration of nox : It has been estimated that the emission of NOx from a coal fired power plant is 1300 g/s. At 100 km downwind (y=10m), what is the concentration of NOx in g/m^3. The wind speed at the top of the stack with a height of 100m is 6.5 m/s and an inversion ..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the normal stress in each portion of the rod

A polystyrene rod consisting of two cylindrical portions AB and BC is restrained at both ends and supports two 6-kip loads as shown. Knowing that E = 0.45 X 106 psi,

  How much subsidence would be expected from an elastic

How much subsidence would be expected from an elastic confined aquifer that has a specific storage of 2.0*10^-6 (ft^-1), a decline in pressure of 200 (lbs/in^2), and aquifer thickness of 400 ft, and a porosity of 32 percent? Assume the aquifer temper..

  What real rate of return will the investor receive

An investor bought a tax-free provincial bond, at a cost of $1000 which will pay $50 interest each year for 20 years. The bond will mature in 20 years and return the original $1000.

  What is the bod5 of the river water

A 250 cubic meter reaction tank contains a waste water having an ultimate BOD concentration of 755 mg/L. If the BOD reaction rate constant is -0.352/day, how much BOD is remaining after 12.0 days?

  Compute the finals velocities v1 and v2 after collision

compute the finals velocities v1' and v2' after collision of the two cylinders which slide on the smooth horizontals shaft. The cofficient of restitution is e= 0.6. m1 = 2 kg, v1= 7m/s and m2 = 3 kg , v2 = 5 m/s

  How large must the storage tank be if it acts as a plug-flow

Radon from well water may pose a radiological health hazard. One treatment technique is simply to hold the water in storage, allowing the radon to decay. The decay rate is first order: Rn?>products;k=0.16day^?1 Consider a situation in which water is ..

  What is the stationing of the pt on the same highway

A crest vertical vurve and a horizontal curve on the same highway have the same design speed. The equal-tangent vertical curve connects a +3% initial grade with a +1% final grade and has a PVC at 101+78 and a PVT at 106+72

  What is significant difference between free jets and flows

What is the most significant difference between "free" jets and flows in confined structures (nozzles, pipes, etc.) in terms of formulation of force terms ÓF(i.e. left hand side) of the momentum equation

  Find how much would the pressure in the tank increase

A rigid tank contains 5kg of water at 20 degrees Celsius. A gage on the tank reads 200kPa. Determine a) the volume of the tank, b) How much would the pressure in the tank increase if the temperature were increased to 50 degrees Celsius.

  Identify each corner by a suitable description on the sketch

When using the rectangular surveying system, under what circumstances is there an exception to the general law that an identified original section corner controls the positions of the boundary lines meeting at or passing through the corner ?

  What is the gage pressure at this depth in fresh water

some skin divers go as deep as 50m. What is the gage pressure at this depth in fresh water, and what is the ratio of the absolute pressure at this depth to normal atmospheric pressure

  Determine the energy loss due to the gradual enlargement

Determine the energy loss due to the gradual enlargement from a 25 mm pipe to a 75 mm pipe when the velocity of flow is 3 m/s in the smaller pipe and the cone angle of enlargement is 20°C.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd