Determine the minimum possible final temperature of the gas

Assignment Help Mechanical Engineering

Reference no: EM13714384

A. Air at 900 kPa and 300 C is expanded adiabatically in a closed system to 100 kPa. Assume constant specific heats. Also complete the problem assuming Variable specific Heats

Determine the minimum possible final temperature of the gas (isentropic case).

Use Eq. 7.33 to show that the process is indeed isentropic (or at least close).

Reference no: EM13714384

Questions Cloud

Cable drum for a crane is to rotate : A cable drum for a crane is to rotate between 160 and 166 rpm. Design a gear drive for 25 hp in which the input pinion rotates at 925 rpm and the output rotates with the drum. The crane is expected to operate with a 50% duty cycle for 120 hours per w..

Determine the minimum power requirement for the pump : The impeller of a centrifugal pump has inner and outer diameters of 14 and 37cm, respectively, and a flow rate of 0.18m3/s at a rotational speed of 1200rpm. The blade width of the impeller is 8.6cm at the inlet and 3.5cm at the outlet.

Calculate the force of impact on the skater : Let's say that one of the skaters in the above video has a mass of 100 kg, and is skateboarding at 9.0m/s when he smacks into a guardrail and comes to a complete stop in 0.2 seconds. Calculate the force of impact on the skater

How long will it keep before its activity is reduced : A 154.7 mCi sample of a radioactive isotope is purchased by a medical supply house. If the sample has a half-life of 14 days, How long will it keep before its activity is reduced

Determine the minimum possible final temperature of the gas : Air at 900 kPa and 300 C is expanded adiabatically in a closed system to 100 kPa. Assume constant specific heats. Also complete the problem assuming Variable specific Heats. Determine the minimum possible final temperature of the gas (isentropic case..

With what acceleration does the bag go down the slide : A child leaves her book bag on a slide. The bag, which is at the top of the slide, starts from rest and reaches the bottom in 1.44 s. With what acceleration does the bag go down the slide

An irreversible heat pump is designed to remove heat : An irreversible heat pump is designed to remove heat at 7 C from the atmosphere and supply 43,200 kJ/h to an industrial process at 420 K . The COP of the actual heat pump is 60% of that of an internally reversible heat pump operating between the same..

Determine the entropy change of the nitrogen during process : A. 0.75 kg of nitrogen is compressed in a cylinder polytropically (n = 1.3). The initial conditions are 140 kPa & 37 C. The gas is compressed until the volume is reduced by half (50% of original). Assume constant specific heats at 300 K

Find the tension in the rope : If the coefficient of kinetic friction between the sofa and the ramp is 0.530, and the sofa has an acceleration of 0.800 m/s2, find the tension in the rope

User Account

All Pages