Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
In a process for the manufacture of acetone, acetone is separated from acetic acid by distillation.
The feed to the column is 60 mol% acetone, the balance acetic acid.
The column is to recover 95% of the acetone in the feed with a purity of 99.5 mol% acetone.
The column will operate at a pressure of 760 mmHg and the feed will be preheated to 70 °C.
For this separation, determine:
a. The minimum number of stages required
b. The minimum reflux ratio
c. The number of theoretical stages for a reflux ratio 1.5 times the minimum
d. The number of actual stages if the plate efficiency can be taken as 60%
A process modification has been devised that will increase the yield to 75%. The additional investment required is $1,250,000, and the additional operating costs are negligible. Is the modification worth making?
air at 4mpa and 3000c enters a will insulated turbine operating at steady state with negligible velocity. the air
Give the relationship between standard free energyand equilibrium constant.The relationship between standard free energy and equilibrium constant is given by?GO= -R Tln(K)Where?GOis the std.
What is the minimum value of qo so that the bottom fibers just begin to yield? What are the depths of plastic penetration d1 and d2 for a load qo that is 1.1 times the value just calculated.
The chemical reactor shown below has a cover (called a head) that is held in place by a series of bolts. The head is made of stainless steel (SG = 8.0), is 3 in. thick, has a diameter of 24 in., and covers and seals an opening 20in. in diameter.
A 25 wt% solution of coffee in water at 70°F is spray dried to a final moisture content of 5% (dry basis) with air that enters at 450°F and 1 atm with a humidity of 0.01 lb/lb (dry basis) and exits at 200°F. Assuming a reasonable value for the spe..
a. What alarms would you add to the vaporizer control scheme shown in Figure? Indicate whether the alarm would signal high or low conditions, what the alarm would signify, and what operator response would be required in each case.
The product is neutralized and washed with water to remove salts. The washed product is usually separated by batch distillation, in which unreacted feeds are recovered first, followed by product, and a polymeric waste is left as residue. The batch..
Describe the principles of a vapour adsorption refrigeration system, and compare this to a vapour recompression system. Which of the two systems is more suitable for refrigeration processes in a brewery or distillery and why?
The precipitate was collected, dried, and found to weigh 1.36 g. Determine the atomic mass of M, and identify M.
Calculate the rate of moisture condensation (kg/h) and the volumetric flow rate of the air drawn from the outside.
For the following cases: How much energy is lost every day when the steam temperature is maintained at 200oC, and the surrounding average air temperature is 20.0oC, and the surroundings average air temperature is 20.0oC? Neglect losses though the end..
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd