Determine the minimum footing length l

Assignment Help Civil Engineering
Reference no: EM13561420

Three columns A, B, C, are collinear, 500 mm in diameter and spaced at 2.0 m center to center. They would carry vertical downward load of 1000, 550, and 700 kN respectively and are supported on a single 1.0 m deep rectangular combined footing. The soil beneath this proposed footing has the following properties: ? = 19.5 kN/m3, c’ = 10 kPa, and ?’ =31o. The ground water table is at a depth of 25 m below ground surface.

a. Determine the minimum footing length L, and the placement of the columns on the footing that will place the resultant load at the centroid of the footing. The footing must extend at least 500 mm beyond the edges of columns A and C.

b. Using the results from part a, determine the minimum footing width B that will maintain a factor of safety of 2.5 against bearing capacity failure. Show the final design in a sketch.

Hint: Assume a value of B, compute the allowable bearing capacity, then solve for B. Show at least 1 iteration with whatever assumed width irrespective of whether or not you get the desired Factor of safety.

Reference no: EM13561420

Questions Cloud

What is the maximum load that diameter steel cable can hold : What is the maximum load that a .75" diameter steel cable can hold if the UTS of the steel is 145,000 PSI and a safety factor of 1.5 is required?
Which laws of thermodynamics are violated : An inventor claims that an engine produces 120 kw with a fuel consumption of 20 kg/h. The energy content of the fuel is 36,00 kJ/kg. The energy is received at a mean temperature of 500C and rejected at a mean temo of 50 C. Which laws of thermodynamic..
Purchasers of the enclosed substance : Purchasers of the enclosed substance should carefully and thoroughly follow the instructions provided herein for the use of the substance
Which one of the following would have the greatest impact : A spread footing supported on a sandy soil has been designed to support a certain column load with a factor of safety of 2.5 against bearing capacity failure. However, there is some uncertainty in both: the column load, P, and the friction angle, ?
Determine the minimum footing length l : etermine the minimum footing length L, and the placement of the columns on the footing that will place the resultant load at the centroid of the footing. The footing must extend at least 500 mm beyond the edges of columns A and C.
Purchasers of the enclosed substance : Purchasers of the enclosed substance should carefully and thoroughly follow the instructions provided herein for the use of the substance
How many more festivals can be sponsored without raising : It takes $10,000 to  put on a festival each year immediatly before this years festival the sponsoring committee finds that it has $40,000 in an account paying 15% interest compounded annualy after this year how many more festivals can be sponsored wi..
What is the present worth of the three payments if interest : Payments of $1000 are to be made at the end of each year for the next 3 years. What is the present worth of the three payments if interest is 12% compounded monthly? what series of monthly payments would be equivalent to the $1000 year payments?
How much calcium bicarbonate will need to be added : How much calcium bicarbonate (kg/day) will need to be added per day in water with alkalinity of 30 mg/L CaCO3 (assume for simplicity only bicarbonate alkalinity is present)

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the maximum depth of water possible without

A 1-m diameter cylindrical mass, M, is connected to a 2-m widerectangular gate. The gate is to open when the water level,h, drops below 2.5 m. Determine the required value forM. Negate friction at the gate hinge and the pulley.

  What is the compressor power input in kw

A vapor-compression refrigeration system, using Refrigerant 134a as the working fluid, has evaporator and condenser pressure of 1.4 bar and 12 bar, respectively. The refrigerant passes through each heat exchanger with a negligible pressure drop

  A ball is thrown with a velocity of 25ms at a building the

a ball is thrown with a velocity of 25ms at a building. the building is 20m high the man throwing the ball is 40m from

  Identify each corner by a suitable description on the sketch

Make a sketch indicating the incorrect and correct positions of such an original section corner and also the positions of the adjacent corners used in relocating that corner

  Determine the filtration rate at the depth of the layer

The absolute viscosity and density of water are 1.4X10^-3 Pa-s and 998 kg/m^3, respectively. For a head loss of 0.1 m, determine the filtration rate (m/d) if the depth of this layer of sane is 0.1m

  Determine what is flexural rigidity ei of the diving board

Consider a diver weighing 200 lb at the end of a diving board that cantilevers out over 3 ft. The diver oscillates at a frequency of 2 Hz. What is the flexural rigidity EI of the diving board

  Calculate the concentration of methanol in the exit gases

You have a stream of air containing methanol at 5% by volume. The stream is flowing at 2000 actual ft^3/min at 1 atm pressure and 110 F. The regulations require94% removal of the methanol, and you decide to try a water absorption column, using pure w..

  What force vector does the angled member apply

The linkage shown is made up of two 3-kg rectangular members (0.4 m by 0.1 m), and is flying through the air. At the instant shown, the vertical member has angular velocity 4 rad/s, and the angled member has angular velocity 1 rad/s.

  Determine what is the rate of discharge with rubble masonry

A 5-m wide rectangular open channel lined with rubble masonry (n=0.025) and laid on a slope of 0.0004. If the depth of flow is 3 m, what is the rate of discharge (m3/s)

  Round up yellow and all-red times to the nearest ½ second

Determine the appropriate yellow and all-red interval to use for each phase. Assume a 10 ft/sec2 deceleration rate, a one second reaction time, and a 20 ft. vehicle length. Round up yellow and all-red times to the nearest ½ second.

  What conflicts do you see between the formal law

what conflicts do you see between the formal law enforcement code of ethics and the police subculture or cop code? what

  Estimate the settlement of 10ft and 5ft square footing

Footings for a structure are to be built beneath a basement slab on a clay soil at a depth of 20 ft below present ground level. The groundwater table is 15ft below the ground surface. The soil void-ratio is about 0.087.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd