Determine the maximum thermal efficiency for any power

Assignment Help Mechanical Engineering

Reference no: EM13631071

Ocean temperature energy conversion (OTEC) power plants generate power by utilizing the naturally occurring decrease with depth of the temperature of ocean water. Near Florida, the ocean surface temeprature is 28 degrees C, while at depth of 900 m the temperature is 5 degrees C. Determine the maximum thermal efficiency for any power cycle operating between these temperatures. The thermal efficiency of existing OTEC plants is approximately 2 percent. Compare this with the result of part (a) and comment.

Reference no: EM13631071

Questions Cloud

If the design load on the prototype is 500 n what will be : the drag on a 2-m. diameter satellite dish in an 80 kmhr wind is to be determined by a wind tunnel test using a

The piston rises to a new position doing 100 j of work on : a cylinder with a movable piston contains a gas. initially the gas temperature is 25 c. a two stage process happens. in

Tests on a geometrically-scaled model elbow will use water : a prototype 90 degree pipe elbow has ethyl alcohol at 20 degrees celsius flowing through it. the pressure drop through

Determine the power required in hp to heat the house using : a building for which the heat transfer rate through the walls and roof is 1350 btuh per degree temperature difference

Determine the maximum thermal efficiency for any power : ocean temperature energy conversion otec power plants generate power by utilizing the naturally occurring decrease with

At what frequency does the inductive reactance of a 820 : at what frequency does the inductive reactance of a 82.0 microh inductor equal the capacitive reactance of a 82.0

Derive an expression for the intermediate temperature t in : two reversible power cycles are arranged in series. the first cycle receives energy by heat transfer from a reservoir

Determine the maximum deflection angle in degrees obtained : as a first step towards analyzing oblique shock waves in hypersonic flow consider the limiting case of infinite mach

When an ac source is connected across a 150-omega resistor : when an ac source is connected across a 15.0-omega resistor the rms current in the resistor is 7.10 a.a find the rms

User Account

All Pages