Determine the maximum temperature the component

Assignment Help Civil Engineering
Reference no: EM13560247

1.A component that is made of S-590 alloy is to be subjected to a static stress of 400 MPa at a high temperature. Using a safety factor of two based on the stress, determine the maximum temperature the component must be exposed to for it to sustain the stress for at least 1000 days.

2.A 12inx1inx3in ASTM 36 steel bar is loaded with an axial load of 90,000lbs and a transversal load of 288,000lbs (force applied perpendicular to the 1in side) The proportionality limit is 34,000psi. Compute (a) the strains in each of the transveral and longitudinal axes and (b) the total transversal dimension changes. Poisson's ratio is equal to 0.25.

Reference no: EM13560247

Questions Cloud

Is imc campaign centred : Is IMC campaign centred
What is the effective vertical stress 12m below the water : A river is 6m deep. The riverbed material has a saturated unit weight of 19.5kN/m3. What is the effective vertical stress 12m below the water surface?
Draw to scale the streakline path-line of the particle : For a given hypothetical flow, the velocity from time t=0 to t=5 seconds was u=2 m/s , v=0. Then, from time t=5 s to t=10 s, the velocity was u=+3 m/s, v=-4 m/s. A dye streak was started at a point in the flow field at time t=0
What kinds of behaviors exhibited by elementary-age : What kinds of behaviors exhibited by elementary-age students can be indicators that they are dealing with literacy challenges?
Determine the maximum temperature the component : A component that is made of S-590 alloy is to be subjected to a static stress of 400 MPa at a high temperature. Using a safety factor of two based on the stress, determine the maximum temperature the component must be exposed to for it to sustain the..
What are the five different marketing management orientation : What are the five different marketing management orientations.? Which orientation do you believe Apple follows when marketing products such as the iPhone and iPad?
Find the period of revolution of the asteroidin years : An asteroid, whose mass is 1.5 x 10-4 times the mass of Earth, find the period of revolution of the asteroidin years
What does research say about the effectiveness : Qualitative reading inventories are often used to identify students' literacy challenges. What does research say about the effectiveness of these assessments?
Problems of domestic violence : Identify and describe the state of major problems of domestic violence by comparing present-day American society to that of at least four other cultures.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Write possible goal-scope and functional unit for the lca

You are preparing a life-cycle assessment of different transportation options for getting from your house to work (10 miles each way). The options include carpooling with three or more people, one person in a car, bicycling, or taking the bus.

  Define which needs to be shafts minimum diameter

Assuming that the soil layers continue much beyond 60 feet in a similar pattern (obviously no landfill) in terms of friction and bearing capacities, recommend two different solutions that could allow the shafts to transmit their loads by 1) end be..

  Compute the shear modulus for the aluminum

The elastic portion of the tension stress-strain diagram for an aluminum alloy. The specimen used for the test has a gauge length of 2 in and a diameter of 0.5 in. When the applied load is 9 kips, the new diameter of the specimen is 0.49935 in.

  Slope deflection approach to find complete deflection

Use slope deflection approach to find complete deflection solutions for a fixed fixed beam with concentrated force, F, distance a from left end and axial load P.

  What is the annual power cost of the ro system

Is the system within membrane manufacturer's warranty requirement of maximum flux rate of 14 gfd? What is the annual power cost of the RO system?

  Determine the minimum weight of the bucket from sliding down

If the coefficient of static friction between the cord and the fixed peg at B is fs =0.25, determine the minimum weight of the bucket that will prevent the block from sliding down the incline.

  What is the critical state angle of friction of the soil

The soil undergoes shear failure and reaches critical state on this plane when the pore-water pressure is increased to 120 kPa while keeping the total normal and shear stresses constant.

  What was the drivers associated reaction time in seconds

The driver strikes the sign at a speed of 25 mi/h. If the student was traveling at 55 mi/h when the sign was spotted, what was the drivers associated reaction time in seconds

  Estimate the required removal efficiency of particles in esp

An electrostatic precipitator (ESP) is being designed to collect flue gas particles at a power plant. The following information has been collected: electric field intensity = 100,000 V/m, and average particle charge = 0.30 fC (1 fC = 10-15 C).

  The mass of the water that is displaced by the portion

According to Archimede's principle, the buoyancy force actingon that object that is partially immersed in a fluid is equal tothe weight that is displaced by the portion of the object that issubmerged.

  Find the mass of air in a closed chamber measuring

Find the mass of air in a closed chamber measuring 35 ft by 20 ft by 10 ft, when the pressure is 17 lb/in^2 and the temperature is 75°F, assuming air to be an ideal gas

  Determine the force in member ac-fh and fg

determine the force in member AC, FH, and FG and indicate if the member is in tension or compression. List all zero force members.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd