Determine the maximum possible flame temperature

Reference no: EM13564992

1.For each subcritcal, critcal, and supercritcal flows, comment on the values for the Froude number, the depth of the water channel, and the specific energy. How do these values compare to each other for each of the flow types?

2.Aqueous sodium cyanide wastes at a metal processing industry are to be treated with chlorine and NaOH. Calculate the stoichiometric quantity of CL2 required daily to destroy the cyanide from 5 Kg of NaCN.

3.A 2 foot tall multi-stage weir placed in a channel to cause the water to flow over the contracted weir at a height of 0.75 feet. There are 2 contractions and the original length is 6 feet. What is the discharge, in cubic feet per second?

4.Consider your cooking gas contains 80% propane and 20% butane. While burning on a cooktop, assume it burns with 200% excess air. If no heat is lost, determine the maximum possible flame temperature.

Reference no: EM13564992

Questions Cloud

Find an estimate of the concentration of co at 6 pm if there : Find an estimate of the concentration of CO at 6 PM if there was no CO in the air at 4 PM. (Assume that CO is conservative and that there is instantaneous and complete mixing in the box)

What is the actual residence time then : The secondary clarifier actually produces 3,000 mg/l Xr, but RAS stays at 25% as originally planned. Do F/M, MLVSS and SRT change from what was planned?

Draw each of these circumstances and describe why each : Define flow at a hydraulic jump (upstream and downstream) in terms of the types of flow and corresponding Froude number. What is the depth of water at each section (upstream and downstream) compared to critical depth?

Will the vc meet minimum ssd standards if speeds can : A particular crest vertical curve (VC) on US 280 at Shelton Mill Rd has long been criticized as being unsafe. Its length is 400 feet. The prevailing speed on the crest VC is 50 mph

Determine the maximum possible flame temperature : Consider your cooking gas contains 80% propane and 20% butane. While burning on a cooktop, assume it burns with 200% excess air. If no heat is lost, determine the maximum possible flame temperature.

Find the coefficient of permeability of the clay for : A laboratory consolidation test was performed on a clayey soil specimen, which was drained on both top and bottom. The time for 50% consolidation was 6.2 minutes, and the specimen's thickness at 50% consolidation

Compute the amount of primary consolidation settlement that : A compressible 12-ft clay layer beneath a building is overlain by a stratum of sand and gravel and underlain by impermeable bedrock. The total expected primary consolidation settlement of the compressible clay layer due to the building load is 4.60 i..

What are the density volume-to-capacity ratio and level : A 5% upgrade on a six-lane freeway (three lanes in each direction) is 1.25 mi long. On this segment of freeway, the directional peak-hour volume is 3800 vehicles with 2% large trucks and 4% buses (no recreational vehicles), the peak-hour factor is 0...

How much heat had to be transferred to the vessel : Alkaloids are chemical compounds containing nitrogen that can be produced by plant cells. In an experiment, an insulated closed vessel 1.673 m3 in volume was injected with a dilute water solution containing two alkaloids: ajmalicine and serpentine.

User Account

All Pages