Determine the maximum moment that can be carried

Reference no: EM13550425

A rectangular reinforced concrete beam with dimensions b = 14in, d = 25in, and h = 28in is reinforced with three No. 10 bars. Material strengths are fy = 60,000 psi and fc prime = 5,0000 psi.

a.) Find the moment that will produce the first cracking at the bottom surface of the beam, basing your calculation on I gross, the moment of inertia of the gross concrete section.

b.) Repeat the calculation, using Iut, the moment of inertia of the uncracked transformed section.

c.) Determine the maximum moment that can be carried without stressing the concrete beyond 0.45 fc prime or the steel beyond 0.60fy.

d.) Find the nominal flexural strength from part (d.) to the service capacity from part (c.). e.) Compute the ratio of the flexural strength from part (d) to the service capacity from part (c).

Reference no: EM13550425

Questions Cloud

Nighttime traffic on a single lane of rural highway is light : Nighttime traffic on a single lane of rural highway is light, with a flow of 40 vehicles/hour , and is well described by a Poisson arrival process.

Determine the worked deeloped : Air enters a turbine operating at steady state at 8 bar, 1127 C and exits at 1.5 bar, 347 C. The heat transfer from the turbine to its surroundings is 10 kJ/kg of air flowing through the turbine. Neglecting kinetic and potential energy changes and as..

Water is observed to be seeped through this slope at a rate : The relative density of a sloped sand deposit is known to be 75%. Water is observed to be seeped through this slope at a rate such that the discharge velocity is 0.6 m/day.

Formulate an optimization problem to help the company find : Three parallel rural routes connect two cities A and B. Traffic on these routes mainly consists of heavy trucks for a logging company, and passenger vehicle flow can be neglected. The performance functions of these three routes are

Determine the maximum moment that can be carried : Find the nominal flexural strength from part (d.) to the service capacity from part (c.). e.) Compute the ratio of the flexural strength from part (d) to the service capacity from part (c).

Calculate the height of the model : An ogee spillway of a gravity dam is to be modeled using water. The spillway section is 40 feet high, its crest length is 60 feet and the maximum discharge is 3,000 CFS when the head on the crest of the spillway is 5 feet. Using a model scale of 1:10..

Proof that it follows from the solution obtained that : Find the particular solution for a = 4 subject to the initial conditions y(0) = 0, dy/dt = 1 m/s at t = 0. Plot this solution and determine the largest displacement of the mass using calculus.

Determine the carburizing time necessary to achieve a carbon : Determine the carburizing time necessary to achieve a carbon concentration of 0.35 wt% at a position 2 mm into an iron–carbon alloy that initially contains 0.10 wt% C

How long will it take for the concentration to be one-quarte : A batch system is assumed to be first order. The initial concentration is 225 mg/L. If the reaction rate constant is 0.65 hr^-1, how long will it take for the concentration to be one-quarter the starting concentration?

User Account

All Pages