Determine the maximum height the projectile will reach

Assignment Help Civil Engineering
Reference no: EM13544535

1.If the atmospheric pressure is 14.20 psia and a gage attached to a tank reads 12.5 inHg vacuum, what is the absolute pressure within the tank?

2.A soil has a moist buldk density of 1950 kg/m^3, a dry bulk density of 1750 kg/m^3, and a soilds mass density of 2650 kg/m^3. determine the saturation ratio

3.A projectile is fired up into the air at a speed of 161 m/s at an angle of 64° relative to the horizontal. Determine the maximum height the projectile will reach.

Reference no: EM13544535

Questions Cloud

Should the engineer use the un-identified material or the : The modulus of elasticity of an un-identified metal is known to be 3000 ksi. An engineer has to design a rod with a fixed diameter to carry a load, P, and wishes to keep the deformations in the rod to a minimum.
What is the concentration of the mixture of the stream : Directly below the discharge point is a prime fishing spot and the fish are intolerant to salt concentrations above 200 mg/L. How much salt should be removed per day from the plant effluent stream in order to maintain a concentration of salt
What will be the ratio of the mass of natural gas : Natural gas is stored in a spherical tank at a temp. of10oC. At a given initial time, the pressure in thetank is 100 kPa gage, and the atmospheric pressure is 100 kPaabsolute
Explore the advantages and disadvantages of law making : Explore the advantages and disadvantages of law making
Determine the maximum height the projectile will reach : A projectile is fired up into the air at a speed of 161 m/s at an angle of 64° relative to the horizontal. Determine the maximum height the projectile will reach.
What would the manometer reading be for the same pressure : Two vessels are connected to a differential manometer using mercury (s=13.56), the connecting tubing being filled with water. The higher-pressure vessel is 5 ft lower in elevation than the other
What is the tree horizontal length of the recorded slope : A 100 ft steel tape of cross-sectional area 0.0025 in^2, weight 2.3 lb, and standardized at 68 degrees F is 99.992 ft between end marks when supported throughout under a 12-lb pull. What is the tree horizontal length of the recorded slope distance BC..
What would you expect the barometer reading : A scientist plans to build a water barometer. When the atmospheric pressure is 990 mb abs and the water temperature is 70 degrees Celsius, what would you expect the barometer reading (water rise) to be?
What torque is required to drive the disk at 760 rpm : A flat disk spins within an oil-filled enclosure. Clearances between the enclosure to both sides of the disk is 2.3 mm. The disk surface (area subject to shear) extends from radius 10mm to 90 mm

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the drawdown

Calculate the drawdown at the well (use r which is the distance from the pumping well = 18 in) with total withdrawals from storage after (a) 1 min, (b) 1 h, (c) 1 day, (d) 1 month, and (e) 1 yr of continuous pumping, at design capacity.

  Compute the design compressive strength for lrfd

A w14X74 of A992 Steel has a length of 20 feet and fixed ends. Compute the design compressive strength for LRFD and the allowable compressive strength for ASD.

  Find the support movements draw sfd and bmd

A fixed beam of span 6m carries point loads 20kN and 15kN at 2 m and 4 m from the left end respectively. Find the support movements draw SFD and BMD

  Compute nominal compressive strength for a500 grade b steel

An HSS 10×8×3?16 is used as a compression member with one end pinned and the other end fixed against rotation but free to translate. The length is 12 feet. Compute the nominal compressive strength for A500 Grade B steel

  Determine if equation of continuity is satisfied by sketch

Consider the plane polar coordinate velocity distribution V_r=C/r, V_0=K/r, V_z=0, where C and K are constants (a) determine if the equation of continuity is satisfied (b) by sketching some velocity vector directions

  Determine required diameter of each reinforcing steel bar

If the column is subjected to an axial compressive force of 800 kN, determine the required diameter of each reinforcing steel bar so that one-third of the load is carried by the steel and two-thirds by the concrete. Assume Esteel= 200 GPa and Econ..

  Determine what is the equation for average vehicle delay

What is the equation for average vehicle delay Is it averge queue over arrivals Average queue over average arrivals

  How many pounds of copper sulfate should be dissolved

You have determined that a 0.5 ppm concentration of copper sulfate should be applied to a lake to control the growth. The lake volume is 50 ac-ft. How many pounds of copper sulfate should be dissolved in the lake

  What are the coordinates of the centroid

For determining the centroid of the area, two square segments are considered; square ABCD and square DEFG. What are the coordinates (x, y ) of the centroid of square DEFG?

  Use activity coefficients estimated from ionic strength

The total dissolved inorganic carbon (TIC) of a sample of groundwater is 8.33 mM. The temperature of the aquifer is 15C, the pH is 7.5, and the ionic strength is 0.05 M. What is the H2CO3, HCO3-, CO3 2-, and the partial pressure of CO2? [Use activ..

  What is the length of the core in inches if the diameter is

If the porosity of a core sample is 26 percent, the pore volume is7.7 cc, what is the length of the core in inchesif the diameter is 1.5 inches?

  Determine the shortest stopping distance for each moment

Test reveal that a normal driver takes about 0.75s before he can react to a situation to avoid a collision. It takes about 3 seconds for a drunk driver to do the same. If such drivers are traveling on a straight road

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd