Determine the maximum displacement of the plate

Assignment Help Civil Engineering
Reference no: EM13211146

Determine the maximum displacement of the plate A if the billet strikes the plate with a speed of 8 . Neglect the mass of the springs, rollers and the plates A and B. Take = 4000 , = 40000 .

Reference no: EM13211146

Questions Cloud

How much of a reduction in the automobile emission : How much of a reduction in the automobile emission rate would be required to achieve the maximum eight-hour average NAAQS for CO at steady state 9ppmv (10.3 mg/m3)?
How that impacts your financial plan : Explain your personal risk tolerance and how that impacts your financial plan and explain your time horizon and how that impacts your financial plan.
Explain how much water can be produced if the gases react : hydrogen and 6.8 * 10^-4 mol of oxygen. How much water can be produced if the gases react?
Hat is the probability that more than 2.5 inches : what is the probability that less than 0.5 inches of precipitation will occur in any January? What is the probability that more than 2.5 inches wil
Determine the maximum displacement of the plate : Determine the maximum displacement of the plate A if the billet strikes the plate with a speed of 8 . Neglect the mass of the springs, rollers and the plates A and B. Take = 4000 , = 40000 .
Determine the molar mass of a protein : The molar mass of a protein is determined from a measurement of the osmotic pressure. If 0.01 grams of the protein is dissolved in 1 ml. and osmotic pressure
Calculate the peak financial requirement : given the following cost expenditures for small warehouse answer project calculate the peak financial requirement, average overdraft.
What must be the radius of the steel wire : What must be the radius of the steel wire if it is to stretch the same distance as the aluminium wire, so that the two wires maintain equal lengths after the masses are attached?
Compute the radius of the curve : A simple curve has a central angle of 42degreess. A point Y is located 24m from the vertex and has a perpendicular distance of 3.00m from the back tangent.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What length l of splice plate is needed

two strips of a plastics material are bonded together as shown. The average shearing stress in the glue must be limited to 1000 kpa. what length L of splice plate is needed if the axial load carried by the joint is 55 kN and the width (W) is 315 m..

  What is the distiniction b/n point and non point sources

what is the distiniction b/n point and non point sources of water pollution and thier varation with surface and ground water?

  Principle of lateral continuity

Would you expect to find the Tapeats Sandstone on top of the Great Unconformity in all places in the Grand Canyon? Why, or why not?

  What is the average length of queue

What is the average length of queue, the average time spent in the system, and the average waiting time in the queue?

  What is the design speed of he curve

An equal-tangent crest vertical curve is designed with a PVI at station 110+00 and a PVC at station 107+43.3. if the high point is station 110+75.5 what is the design speed of he curve?

  What types of attacks can still occur

Do the administrators of server systems still have to be concerned about, and take further countermeasures against DoS attacks, if so, what types of attacks can still occur, and what measures can be taken to reduce their impact?

  Determine the value of gravity in units of meters

if a ball is dropped from a height of 800 cemtimeters, and the impact velocity is 41 feet per second, determine the value of gravity in units of meters per second.

  Calculate the equilibrium concentration of dissolved oxygen

Calculate the equilibrium concentration of dissolved oxygen in 15ºC water at 1atm and again at 2,000m elevation.

  Annual power cost of the ro system

Is the system within membrane manufacturer's warranty requirement of maximum flux rate of 14 gfd? What is the annual power cost of the RO system?

  Determine the required pumping rate

Four pumps are to be used in 0.5-m diameter wells at the four corners of the site. Determine the required pumping rate. The aquifer has T = 1600 m^2/day and the wells each have a radius of influence of 600 m.

  What is the efficiency of the device

If a mechanical device requires 450J of work to do 310J of work in lifting what is the efficiency of the device?

  Calculate the deflection of the beam

Also calculate the deflection of the beam to check that it complies with the design limit of L/200. Only variable actions are required for deflection check.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd