Determine the maximum average tidal power at the site

Assignment Help Electrical Engineering
Reference no: EM13285129

A tidal energy system has an average tidal range of 5 m and a basin area of 21.5km^2. The system is designed to generate power during both incoming and outgoing tides. The seawater density 1025kg/m^3, and the tidal period is about 12.5 hours.
(a)Determine the maximum average tidal power at the site?
(b). If the overall efficiency of the plant is 30%, find the annual electric energy produced?

Reference no: EM13285129

Questions Cloud

Determine position of current max nearest the load : A 50 (ohm) lossless transmission line is terminated in a load with impedance Z= (30-j50) ohm. the wavelength is 8cm. Determine: (a) reflection coefficient (solved: 0.1 - j0.56 or 0.56 angle -79.9)
Calculate the fraction of the electrons in one sphere : Two small silver spheres, each with a mass of 12.0 g, are separated by 1.00 m. Calculate the fraction of the electrons in one sphere
Most accurately depicts this relationship explain : Based on your prior knowledge of the relationship between aggression and viewing of violent television programs, which scatter diagram do you think most accurately depicts this relationship? Explain.
What is the magnitude of the tension on the vine : Tarzan, who weighs 900N, swings from a cliff at the end of a 40.0 m vine that hangs from a high tree limb, What is the magnitude of the tension on the vine
Determine the maximum average tidal power at the site : A tidal energy system has an average tidal range of 5 m and a basin area of 21.5km^2. The system is designed to generate power during both incoming and outgoing tides. The seawater density 1025kg/m^3, and the tidal period is about 12.5 hours.
How is preferred stock similar to bonds : How is preferred stock similar to bonds?
Highlighting the genetic and environmental influences : After completing this activity, you will be able to describe Bowlby's ethological theory of attachment and trace the development of attachment during the first two years in addition to highlighting the genetic and environmental influences of a..
What potential will be required to reduce photocurrent : The work function of platinum is 4.09ev what retarding potential will be required to reduce the photocurrent to zero in a photoelectric experiment with Pt electrodes if the wavelength of the incident light is 2440 angstrom
Calculate marginal cost of capital for the various intervals : What factors do you feel might cause Bosworth to recommend a different capital budget than the one obtained in question 3?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  What is the pressure of the gas mixture

a sample of gas composed of 5.7 grams of carbon dioxide and 3.6 grams of neon in a container with volume 5.7L and temp 67 degrees Celsius. what is the pressure of the gas mixture

  Calculate the impedance of the combination in polar form

A 100µF capacitance is connected in parallel with the series combination of 10-mH inductance and a 1 ohm resistance. Calculate the impedance of the combination in polar form for angular frequencies of 500, and 1000 radians per second?

  Design a circuit using a thermister in a wheatstone bridge

Design a circuit using a thermister in a Wheatstone bridge and a comparator to turn on a furnace when the temperature drops below 70 ?F. Use real components selected from an online distributor, such as Digi-Key or Mouser

  How many ip packet will be required to transport entire song

Given that you want to transfer a 3MB song by sending packets across an Ethernet link that has a MTU. of 1500 Bytes, answer the following questions. (for this question use 1MB = 1024KB, 1KB=1024Bytes)

  Find expression for scalar electric potential at any point

Find an expression for the scalar electric potential at any point on the axis of the ring. Indicate clearly your coordinate system and its geometry. Check the limiting case as the field point recedes to infinity.

  Explain system interrupt services

The 8086 Microprocessor Operating Systems and System Interrupt services, Please help me write a program that will display the hex code for any key, or key combination, that is pressed on the keyboard.

  Calculate the voltage at the transmitting end

A 60-Hz, single-phase transmission line has a length of 80 miles. Its shunt conductance (G) is 3.4×10?11 S/mile, resistance (R) is 0.1 ?/mile, capacitance (C) is 16 pF/mile, and inductance (L) is 0.56 mH/mile.

  What is resistance of resistor that should be connected

A (3V, 300mA) flashlight bulb is to be used as the dial light in a 120V radio. What is the resistance of the resistor that should be connected in series with the flashlight bulb to limit the current

  Obtain and simplify the flip flop charactersitic equations

Analyze the synchrounous circuit with input X and output Z constructed with two flip flop of JK type with outputs QA and QB. The flip flop input exciatation are as follows: JA=XQB; KA=0; Jb=XQA'; KB=QA. the output equation is Z=XQB'.

  Identify the psk type and calculate the bandwidth for modem

i) Identify the PSK type and calculate the bandwidth if the modem is transmitting with 9600bps and 2400 baud.  ii) Suggest a way to reduce the baud rate to 1200 baud and calculate the new bandwidth.

  Discuss initial approach to designing and defining the site

A critical aspect of web design is the approach that you take to define and develop the parameters of your site. This includes your review and assessment of your own work to validate your site to make sure that it meets the needs of your client.

  Explain what is the byte stored at address

Using the table, what is the byte stored at address 2F? Using the table, what is the byte stored at address 33?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd