Determine the mass flow rate of the superheated steam

Assignment Help Mechanical Engineering

Reference no: EM13703038

Liquid water at 200 kPa and 20 C is heated in a chamber by mixing it with superheated steam at 200 kPa and 150 C. Liquid water enters the mixing chamber at a rate of 1.3 kg/s, and the chamber is estimated to lose heat to the surrounding air at 25 C at a rate of 1140 kJ/min. If the mixture leaves the mixing chamber at 200 kPa and 60 C, determine (a) the mass flow rate of the superheated steam and (b) the rate of entropy generation during this mixing process.

Reference no: EM13703038

Questions Cloud

Maximum allowed pressure within the cylindrical vessel : Consider a pressure vessel made by welding together two hemispheres of radius 20 ft and wall thickness 1.5 inches. If the allowed normal stress is 90 ksi, calculate the maximum allowed pressure within the spherical vessel.

Simply supported beam of length-shear and moment diagrams : Consider a simply supported beam of length 50 ft subjected to a uniformly distributed downward load of 10 kips/ft from x=10 ft to x=40 ft and concentrated downward loads of 100 kips at x=10 ft and x=40 ft. Determine the shear and moment diagrams from..

Calculate the bending stress : Consider a T shaped wooden beam comprised of a 2 x 6 and a 2 x 8 20 feet long. [Use nominal dimensions for beam cross section.] A steel plate 20 feet long and of cross section 6 x ½ inches is fastened to the top of the T. Calculate the bending stress..

Determine forces in members DE-DF and EF of scissors truss : Determine the forces in members DE,DF, and EF of the scissors truss shown. Also, state whether the members are in tension or compression. Note that the 400 lb force is directed along the line BF and the 800 lb force is parallel to line BF.

Determine the mass flow rate of the superheated steam : Liquid water at 200 kPa and 20 C is heated in a chamber by mixing it with superheated steam at 200 kPa and 150 C. Liquid water enters the mixing chamber at a rate of 1.3 kg/s, and the chamber is estimated to lose heat to the surrounding air at 25 C a..

Find the power input to the compressor : A steam compressor receives H 2O at 90kPa and 75% quality at a rate of 50 kg/s. Part way through the compressor, steam is bled off at 20kg/s, 2MPa and 300C. The remainder exits the compressor at 10MPa, 500C. Assuming heat transfer and changes in po..

Determine the analysis in terms of mole fractions : The analysis of a mass basis of an ideal gas mixture at 50 F, 25 lbf/in2. is 60% CO2, 25% SO2, and 15% N2. The analysis in terms of mole fractions. Determine: The apparent molecular weight of the mixture. The partial pressure of each component in lbf..

What will be the approximate density of the boat hull : A group of mechanical engineers like catamaran sailing on the Great Salt Lake and decide to use a glass-fiber reinforced composite with a high fiber fraction for a new boat design. The composite is 60 volume % SiO2 glass fibers and the remainder is a..

Determine the thermal efficiency of a carnot cycle operating : An ideal Otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 540R and 2400R.

User Account

All Pages