Determine the manning coefficient of channel roughness

Assignment Help Civil Engineering
Reference no: EM13298321

A discharge of 2,200 ft^3/sec flows in a trapezoidal channel at a normal depth of 8.0 ft. The channel has a slope of 0.01, a 12-ft bottom width, and side slopes of 1:1 (H:V). Determien the manning coefficient of channel roughness. Also determine the sensitivity range of the roughness coefficient estimate if the flow rate can only be estimated to within +/- 200 cfs.

Reference no: EM13298321

Questions Cloud

Explain the adiabatic reversible expansion of an ideal gas : Show that for the adiabatic reversible expansion of an ideal gas, T1^(Cv/R)V1 = T2^(Cv/R)V2
How is the spent carbon removed from the pressure contactors : Testing has already been completed on the water and the Usage Rate for the carbon is 0.4 pounds of carbon per 1000 gallons of water treated. The required EBCT is 20 minutes and the carbon longevity must be at least 6 months.
What emf is induced across the wings : a metal airplane flies horizontally at 200. m/s where the Earth's magnetic fiels is vertical and is 45.0uT. If the wingspan is 25.0 meters. what emf is induced across the wings
Calculate the ph of a 1-l solution containing sodium acetate : Calculate the pH of a 1-L solution containing 0.01 M sodium acetate after the addition of 3 mL 0.5 M H2SO4
Determine the manning coefficient of channel roughness : A discharge of 2,200 ft^3/sec flows in a trapezoidal channel at a normal depth of 8.0 ft. The channel has a slope of 0.01, a 12-ft bottom width, and side slopes of 1:1 (H:V). Determine the manning coefficient of channel roughness
Which stock would you consider to be riskier : You have estimated the following probability distributions of expected future returns for Stocks X and Y.
Design an earthen channel section into sandy soil : An earthen channel will be excavated into sandy soil for which Vmax = 4.0 ft/sec, n = 0.022, and the recommended m = 3. The channel will have a bottom slope of 0.0011 and accommodate a design flow of 303 cfs. Design (size) the channel section.
Calculate the annual rate of depreciation : In two year you need to earn 3000$ if you get an interest rate of 15.75% compound annually, how much do you need to invest now
Design lined trapezoidal channel to carry on longitudinal : Design a lined trapezoidal channel to carry 20 m^3/sec on a longitudinal sloe of 0.0015. The lining of the channel is to be float-finished concrete (n=0.015). Consider (a) the best hydraulic section and (b) the section with side slopes 1.5:1 (H:V)

Reviews

Write a Review

Civil Engineering Questions & Answers

  Describe the present land capability classification system

Describe the present land capability classification system for agriculture in the caribbean, Identifying its limitations and propose recommendations. 200 word limit

  Determine max torque that can be carried by hollow section

A 32-in.-wide by 0.125-in.-thick by 110-in.-long steel sheet is to be formed into a hollow section by being bent through 360° and having the long edges welded (i.e., butt-welded) together. Assume a cross-sectional medial length of 32 in.

  How many gallons of water are contained in the tank

Develop a table that shows: 1) How many gallons of water are contained in the tank if the volume is measured in increments of 1 ft from the bottom to the top. 2) The mass of water at each increment, expressed in lbm.

  Elevation of the road at station

Given the following data for a vertical curve of a road; G1=-2.5%, G2=+5.5% and station of PVI=250+50.At station 252+50, the vertical curve must intersect an existing road at elevation 48.48ft. the elevation on the tangent section at station 256+5..

  Concentration of tracer in the reactor

What is the concentration of tracer in the reactor 1 h after tracer addition is terminated? The reactor had an initial concentration of tracer of 1.0 mg/L when tracer addition commenced.

  Horizontal distance between the points

A runs slope a distance of 156.777 m from one point to another point at a rate of +1.5%. What is the corresponding horizontal distance between the points?

  Determine what is the effluent bod concentration

An activated sludge tank, 30 x 30 x 200 ft, is designed as a plug-flow reactor, with an influent BOD of 200 mg/L and a flow rate of 1 million gallons per day. a. If BOD removal is first-order reaction, and the rate constant is 2.5 days^-1, what is ..

  Determine the constant angular deceleration

A tub of a washing machine is rotating at 50 rad/s when the power is turned off. If it takes 15s for the tub to come to rest, determine (a) the constant angular deceleration, and (b) the total number of revolutions the tub makes.

  Uniform deterministic arrival rate

Processing begins when the lane reaches capacity, what is the uniform deterministic arrival rate if the vehicle queue is cleared in 35 minutes after vehicles begin to arrive (in veh/min.)?

  Determine maximum amount fabco should be willing to pay

Fabco, Inc., is considering purchasing flow valves that will reduce annual operating costs by $10,000 per year for the next 12 years. Fabco's MARR is 7 percent/year. Using an internal rate of return approach

  Determine speed of sliding on smooth plane just after impact

If they are sliding on a smooth horizontal plane with the velocities shown, determine their speeds just after impact. The coefficient of restitution between them is e = 0.6. Disks A and B have a mass of 16kg and 11kg , respectively.

  Width of the footing if factor of safety given

Characteristic values of the shear strength parameters of the soil are c'= 0, and f' = 400. Determine the required width of the footing if a factor of safety of 3.0 against shear failure is specified when the water table rise to foundation level.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd