Determine the magnitude of the car

Assignment Help Civil Engineering
Reference no: EM13561535

If the car passes point A with a speed of 20m/s and begins to increase its speed at a constant rate of At=0.5m/s^2, determine the magnitude of the car's acceleration when s=100m and x=0.

path: y=16-(1/625)x^2 s=distance

Reference no: EM13561535

Questions Cloud

Describe how it has penetrated corporate : a.Describe how IT has penetrated corporate and government administrative systems.
Determine the clean filter head loss in a filter bed compose : Determine the clean filter head loss in a filter bed composed of 0.3 m of uniform anthracite (with an average size of 1.6 mm) placed over 0.3 m of uniform sand ( with an average size of 0.5 mm)
What is the rate of leakage in gallons per day : Evaporation from a nearby lake was 8 in. during June. It is estimated that 25 percent more will evaporate from the pool than the lake. On July 1, the pool is 5 inches below the top. Does the pool have a leak? If so, what is the rate of leakage in gal..
Develop a strategy for communicating high expectations : Develop a strategy for communicating high expectations
Determine the magnitude of the car : If the car passes point A with a speed of 20m/s and begins to increase its speed at a constant rate of At=0.5m/s^2, determine the magnitude of the car's acceleration when s=100m and x=0.
Write down the speed-density and flow-density equations : Assuming a linear speed-density relationship, the mean free speed is observed to be 60 mph near zero density, and the corresponding jam density is 140 veh/mi.
Portfolio project management : Portfolio project management
How will the concentration of solute change in the water : Some organisms live in shallow ponds, where much of the water will evaporate during the warm, sunny, summer months. How will the concentration of solute change in the water druing this time? Will this create problems for the organims in the pond wate..
Name at least five reasons why new product or service : Name at least five reasons why new product or service

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the consolidation settlement of clay by dividing

The coefficient of volume compressibility is 4x10-4 m2/kN at the ground surface and the reduction in the coefficient of volume compressibility with depth equals depth*0.1*10-4 m2/kN.

  Design the pins so that ledge can support doug and jeremy

Assume the ledge has the dimensions shown and is attached to the building with a series of equally spaved pins around the circumference of the building.

  Determine current supplied if final temperature is 70 degree

Now 300 kJ of heat is transferred to the refrigerant at constant pressure while 110-V source supplies current to a resistor within the cylinder for 6 min. Determine the current supplied if the final temperature is 70 degrees C.

  Find the shortest ladder

a wall 8 ft high is 3/3/8 ft. from a house. find the shortest ladder which will reach from the ground house when leaning to the wall.

  Which process requires more energy completely vaporizing

Which process requires more energy: completely vaporizing 1 kg of saturated liquid water at 1 atm pressure or completely vaporizing 1 kg of saturated liquid water at 8 atm pressure?

  Sketch and label vi-vo and vn versus time

An inverting amplifier is implemented with a R1=10 kilo Ohms and R2= 100 Kilo Ohms, and an op amp with finite open-loop gain a=10^3 V/V. Sketch and Label Vi,Vo,and Vn versus time if Vi is a 1-kHz triangular wave

  Should the soil be compacted at the dry of optimum or at wet

A soil is to be compacted on a site and it is expected that the soil contains a high percentage of montmorillonite. Briefly explain the working principles of two tests that can be carried out to ascertain the presence of montmorillonite in the soil.

  Factor of safety with respect to tensile failure

The maximum gage pressure is known to be 8MPa in a spherical steel pressure vessel having a 250mm diameter and a 6mm wall thickness. Knowing that the ultimate stress in the steel used is (sigma u)= 400MPa, determine the factor of safety with respe..

  Which of the available soils appears to be most promising

A sanitary landfill project needs an import soil for use as an impervious cap over the refuse. The design engineer desires a soil with a high clay content because it will help keep water out of the landfill.

  Design a 4-bitregister with two control inputs s1 and s0

Design a 4-bitregister with two control inputs S1 and S0, four data inputs I3,I2,I1, I0, and four dataoutputs Q3, Q2, Q1, Q0. S1S0=00 means maintain the present value, S1S0=01means

  Coefficient of friction between the dam and foundation is

concrete weights 23.5 knm3 and water weights 9790 nm3. coefficient of friction between the dam and foundation is 0.55.

  Determine unfactored dead load and live load on roof beam

Determine the unfactored dead load and live load on a typical interior roof beam, sketch the loading on the beam, and draw the shear and moment diagrams for the beam assuming the beam is simply-supported.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd