Determine the magnitude and direction of the resultant

Assignment Help Civil Engineering
Reference no: EM13302050

Part of the roof of a sports stadium is to be supported by the cables AB and AC. The forces the cables exert on the pylon A to which they are attached are represented by the vectors FAB and FAC. The magnitudes of the forces are FAB = 100 kN and FAC = 60 kN. Determine the magnitude and direction of the resultant of the two forces exerted on the pylon by the cables.

Reference no: EM13302050

Questions Cloud

Express f in cartesian vector form using coordinate system : The cable from point A to point B exerts a 900 N force on the top of the television transmission tower that is represented by the vector F. Express F in Cartesian vector form using the coordinate system.
Define reactions and state the dominant mechanism : Complete the following reactions and state the dominant mechanism where indicated 3-chloro - 2,2-dimethylbutane + NH3
Federal system and home states system : Explain how cases follow this path, in both the Federal system as well as your home state's system. Show how cases are appealed and for what reasons they may be appealed. How do appellate courts (including the Supreme Court) decide which cases to acc..
How much power did it take to complete the race : A 83.55kg woman walked a 5k race in 53.33 minutes. How much power did it take to complete the race
Determine the magnitude and direction of the resultant : Part of the roof of a sports stadium is to be supported by the cables AB and AC. The forces the cables exert on the pylon A to which they are attached are represented by the vectors FAB and FAC.
Define the chemical warfare gas commonly called mustard gas : Phosgene, COCl2, is the chemical warfare gas commonly called mustard gas. It decomposes as written below. At 900 C, the Kc= 0.83. Assume 0.400 mol of COCl2 are admitted into a 2.00 L container at 900C.
Determine the magnitudes of the lift and drag : The forces acting on the sailplane are represented by three vectors. The lift L and drag D are perpendicular. The magnitude of the weight W is 500 lb. If the magnitude of the resultant of the three forces is 0
What is the smallest distance between two points : If the operators of a spy satellite pondered using it to photograph license plate numbers. what is the smallest distance between two points that it can resolve
Determine what is the rovers weight on the surface of mars : When the Mars Exploration Rover was fully assembled, its mass was 180 kg. The acceleration due to gravity at the surface of Mars is 3.68 m/s2. a) What was the rover's weight when it was at sea level on Earth

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is its specific gravity at 30 percent moisture content

The cross sectional dimensions of a 4-ft-long wood member at 30% moisture content is 1.5 in. x 7.5 in., and its weight is 11 lb. At oven-dry condition, its dimensions and weight are 1.35 in x 6.8 in., and 10.2, respectively. What is its specific g..

  Determine what should the sample volume be

The dissolved oxygen of sample water is 1.5 mg/L. At 25 C, the dissolved oxygen of the dilution water is 8.25 mg/L. You are told the BOD5 of the sample is 130 mg/L. You have a target final dissolved oxygen of 3.0 mg/L (give yourself some leeway).

  Explain roman technology and engineering

Roman technology and engineering. Technology and engineering were among Rome's most famous achievements. Describe and explain the importance of Roman technology and engineering

  Deflection of a simple uniformly loaded beam

Determine the deflection of a simple uniformly loaded beam by the Ritz method,using first one term, then two terms, adn finally three terms in a sine series. Why does the coefficient of sin2piex/L vanish?

  Determine what is the stationing of the pt

A crest vertical curve and a horizontal curve on the same highway have the same design speed. The equal-tangent vertical curve connects a +3% initial grade with a +1% final grade and has a PVC at 101+78 and a PVT at 106+72

  Net rate of flow of linear momentum via control surface

Measurements indicate that to cause this flow the force acting on the contents of the control volume is 40i lb. Determine the net rate of flow of linear momentum through the control surface.

  Mass flow raw through the nozzle

Air enters an adiabatic nozzle steadily at 300 kPa, 200 o C, and 30 m/s and leaves at 100 kPa and 180 m/s. The inlet area of the nozzle is 80 cm 2 . Determine (a) the mass flow raw through the nozzle, (b) the exit temperature of the air, and (c) the ..

  Determine moles of helium in cylinder

As the piston is compressed, the pressure also increases by 2000000 Pa. If there is 4 times as many atoms of nitrogen as helium, how many moles of helium are in the cylinder?

  Calculate the amount of water to be added per cubic meter

An undisturbed soil sample has a total unit weight of 19.4 kN/m3, a dry unit weight of 16.9 kN/m3, and a specific gravity of soil solids (Gs) of 2.69. If the sample could be saturated without changing its porosity, calculate the amount of water (i..

  Determine how many combinations of 2 books can be selected

A customer randomly select 2 of 10 books to purchase. How many combinations of 2 books can be selected

  What size square conduit is needed to transport

A 30mm pipe X 460mm rectangular duct carries air. What size square conduit is needed to transport 4m cube per sec of water at a distance of 45m and head loss of of 1.08m.

  Explain transportation network

Transportation network, A power generator at a dam can send 300 megawatts to substation 1, can send 200 megawatts to substation 2, and can send 250 megawatts to substation 2

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd