Determine the length of pipe required for coliform

Assignment Help Civil Engineering
Reference no: EM13296982

A wastewater treatment plant must disinfect its effluent before discharging the wastewater to a near-by stream. The wastewater contains 4.5*105 fecal coliform colony-forming units (CFU) per liter. The maximum permissable fecal coliform concentration that may be discharged is 2,000 fecal coliform CFU/L. It is proposed that a pipe carrying the wastewater be used for disinfection process. Determine the length of pipe required if the linear velocity of the wastewater in the pipe is 0.75 m/sec. Assume that the pipe behaves as a steady-state plug-flow system and that the reaction rate constant for destruction of the fecal coliforms is 0.23 min-1.

Reference no: EM13296982

Questions Cloud

Find the final velocity of each mass : A 15.5kg object moving in the +x direction at 7.0m/s collides head-on with a 11.0kg object moving in the -x direction at 6.0m/s, Find the final velocity of each mass if the objects stick together
Determine is the flow rate typical for a bathroom faucet : Water in a household plumbing system originates at the neighborhood water main where the pressure is 480kPa, the velocity is 5m/s, and the elevation is 2.44 m. A 19 mm (3/4-in) copper service line supplies water to a two-story residence
How a nerve impulse travels : write a paragraph about how a nerve impulse travels across a synapse +neurotransmitter combines
Determine the steady-state concentration of the pollutant : A well-mixed sewage lagoon (a shallow pond) is receiving 430 m^3/d of sewage out of a sewer pipe. The lagoon has a surface area of 10 ha (hectares) and a depth of 1 m. The pollutant concentration in the raw sewage discharging into the lagoon is 18..
Determine the length of pipe required for coliform : The maximum permissable fecal coliform concentration that may be discharged is 2,000 fecal coliform CFU/L. It is proposed that a pipe carrying the wastewater be used for disinfection process.
Which topological space that we have previously encountered : Which topological space that we have previously encountered appears to be topologically equivalent to the quotient space that results from this partition?
Design a curve for the highway by computing the radius : The PI is at station 250+50, the design speed is 65mi/h, and a maximum superelevation of 0.07 ft/ft is to be used. If the central angle of the curve is 38 degrees, design a curve for the highway by computing the radius and stationing of PC and PT.
How far stream of section would expect to find uniform flow : The slope of the channel is .15% and the mannings roughness coefficient is .038. estimate the depth 100m upstream of a section where the flow depth is 2.2m using the standard step method. Approximate how far upstream of this section would you exp..
What yield on the chicago municipal bonds would make : If Treasury bonds yield 6%, and Carter's marginal income tax rate is 40%, what yield on the Chicago municipal bonds would make Carter's treasurer indifferent between the two? Answer 3.42% 3.60% 3.78% 3.97% 4.17%

Reviews

Write a Review

Civil Engineering Questions & Answers

  Equal-tangent crest vertical curve

An equal-tangent crest vertical curve is designed with a PVI at station 110+00 and a PVC at station 107+43.3. if the high point is station 110+75.5 what is the design speed of he curve?

  Lifting granite rock from the bottom of lake

A 170 kg granite rock (ρ = 2700 kg/m 3 ) is dropped into a lake. A man dives in and tries to lift the rock. Determine how much force the man needs to apply to lift it from the bottom of the lake. Do you think he can do it?

  How many 3-4 inch diameter rivets are required to transmit

How many 3:4-inch diameter rivets are required to transmit 55,000 lb from the two angles to the gusset plate if the allowable shear stress in the rivets is 15,000 psi Assume each rivet carries the same amount of load.

  Effective vertical stresses of the clay layer

The saturated unit weight of the clay is 20kN/m 3 and that of the sand 19 kN/m 3 ; above the water table the unit weight of the sand is 16.5 kN/m 3 . Calculate the effective vertical stresses at the top and bottom of the clay layer.

  Estimate the median and 90th percentile load

Estimate the median and 90th percentile load of SS contained in the runoff. Note: COV = coefficient of variance

  Concentration and precipitate

AGNO 3 is added to a solution containing 0.001 mol Cl - amd 0.001 mol Br- per liter.What are the concentrations of Cl - and Br- remaining when AgCl just begins to precipitate?

  How much force must be applied to keep the gate \

A gate (shaped like .25 of a cylinder with radius R=3m) is used to control the flow of water through a canal.The height of the water in the tank is 30m. How much force must be applied to keep the gate from opening? The gate is 30m wide.

  How is nitrate related to tn and tkn

Show that the drinking water standard of 10 mg/L nitrate as nitrogen is equivalent to 45 mg/L nitrate. How is nitrate related to TN and TKN?

  Evaluate the pressure head at point

Evaluate the pressure head at point a and determine the vertical effective stress at point b and evaluate the lateral pressurein the brown clay

  Elastic modulus of steel

Given: elastic modulus of steel is 200 GPa, yield and ultimate tensile strength of steel are 600 and 750 MPa, respectively.

  Determine the factors of safety against sliding

assume hydrostatic uplift varies uniformly from full hydrostatic head at the heel of the dam to zero at the toe. consider 1m length of dam.

  Determine the x and y scalar components

The forces F1, F2, and F3, all of which act on point A of the bracket, arespecified in three different ways. Determine the x and y scalar components of each of the three forces.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd