Determine the isentropic efficiency

Assignment Help Mechanical Engineering
Reference no: EM13702490

Steam at 5.0 MPa, 500 degrees C enters an insulated turbine operating at a steady state with a mass flow rate of 7kg/s and exits at 0.3 MPa. Kinetic and Potential energy effects are negligible. Determine the maximum theoretical power that can be developed by the turbine, in KW, and the corresponding exit temperature. if the steam exits the turbine at 250 degress C and 0.5 MPa, determine the isentropic efficiency.

Reference no: EM13702490

Questions Cloud

Steam condenses-what is the mass rate of condensation : Steam condenses in a 2cm I.D. thin walled tube of 99% aluminium at 10atm pressure. There are circular fins of constant thickness, 3.5cm in diameter, and every 0.5 cm on the outside. The fins are 0.8mm thick and the heat transfer coefficient from them..
Maximum shear stress developed in the shaft : The 60-mm diameter shaft rotates at 300 rev/min. this motion is caused by the unequal belt tensions on the pully of 800 N and 450 N. Determine the power transmitted and the maximum shear stress developed in the shaft.
An ideal diesel cycle has a compression ratio : An ideal diesel cycle has a compression ratio of 16.8 and a cut off ratio of 1.63. Determine the maximum air temperature and the rate of heat addition to this cycle when it produces 197 hp of power, the cycle is repeated 1,250 times per minute, and t..
Water is the working fluid in regenerative rankine cycle : Water is the working fluid in a regenerative Rankine cycle. The pressure and temperature at the turbine inlet are 8MPa and 550?C, respectively, and the condenser pressure is 7.5KPa. The mass flow rate of steam entering the turbine is 176kg/s.
Determine the isentropic efficiency : Steam at 5.0 MPa, 500 degrees C enters an insulated turbine operating at a steady state with a mass flow rate of 7kg/s and exits at 0.3 MPa. Kinetic and Potential energy effects are negligible. Determine the maximum theoretical power that can be deve..
Pressures-temperatures and specific volumes around the cycle : A cycle composed of three processes: poly tropic compression (n=1.5) from 137 kPa and 38 degrees C to state 2, constant pressure from state 2 to state 3 and constant volume from state 3 to state 1. The heat rejected is 1560kj/kg and the substance is ..
Network administrator at netstack college has chosen cisco : The network administrator at Netstack College has chosen Cisco to provide the routers on his network. Recall that there are six buildings on campus with 250 connections each in four buildings, 180 connections in the fifth building, and 80 conne..
Claims to have invented a new air conditioner : An air conditioning company claims to have invented a new air conditioner, which will maintain a room at 22 degrees C while rejecting 105 kj of heat at 42 degrees C. the unit requires 10KJ of work. Is this device believable? Why?
What is a lan how does the implementation of a lan work : You are employed as an engineer for a startup company. The company is now in the planning stage, and some important decisions must be made about what technology will be leveraged. The company is to be headquartered in Chicago, with small branch..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  The combustion gases leave the heat exchanger at 380 k

the top cycle of a combined cycle power plant has a pressure ratio of 12. air enters the compressor at 300 k at a rate

  The minimum enclosed volume is 14 of the maximum enclosed

a six-cylinder four-stroke spark-ignition engine operating on the ideal otto cycle takes in air at 100 kpa and 25oc and

  Iin the other stream refrigerant 134a enters at 10 bar 80

a wellinsulated counterflow heat exehanger operates at steady state. in one stream liquid water enters at 10 degree

  At the channel outlet the velocity distribution is given by

water enters a wide flat channel of height 2h with a uniform velocity of u 5 ms. at the channel outlet the velocity

  To what temperature must it be cooled in order to have a

the two ends of a cylindrical rod of nickel 120.00 mm long and 12.000 mm in diameter are maintained rigid. if the rod

  The nitrogen is compressed to frac12 of the initial volume

two kg of nitrogen at 40degc and 200 kpa are contained in a frictionless piston-cylinder device. the nitrogen is

  To produce 245 x 109 w of electricity from the waters

1. a hydro-electric plant is used to convert the potential energy of the water behind the dam into electricity. the

  A piece of steel has a conductivity of k 15 wmk and a

a piece of steel has a conductivity of k 15 wmk and a brick has k1wmk. how thick a steel wall will provide the same

  The temperature is 356degc the pipe has a circular

refrigerant r-22 enters a constant diameter pipe at a pressure of 10 bar a temperature of 20degc and a velocity of 2.20

  A steam turbine receives steam as a dry satured vapor at

a steam turbine receives steam as a dry satured vapor at 7.0 mpa and expands adiabatically to atmospheric pressure 100

  Estimate the overall measurement instrument uncertainty for

a pressure measurement system has the following specifications range 0 to 1 kpa linearity error 0.05 fso hysteresis

  A spherical pressure vessel is formed of 16-gauge 00625 in

a spherical pressure vessel is formed of 16-gauge 0.0625 in cold drawn aisi sheet steel. if the vessel has a diameter

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd