Determine the initial temperature of the h2o

Assignment Help Mechanical Engineering

Reference no: EM13704726

Rigid steel tank with a volume of 1 m3 contains 2 kg of H2O initially at 400 kPa.

a. Determine the initial temperature of the H2O

b. Calculate the heat transfer required to lower the temperature to 135 C

c. Calculate the work for the process

d. Show the process on T-v and P-v diagrams

Reference no: EM13704726

Questions Cloud

Determine the amount of oxygen in the tank : The pressure gauge on a 2.5-m^3 oxygen tank reads 500 kPa. Determine the amount of oxygen in the tank if the temperature is 28 degrees C and the atmospheric pressure is 97 kPa.

A piston cylinder device contains : A piston cylinder device contains about 0.25kg of saturated water liquid @ 125C. Now water is heated at constant pressure until it becomes saturated vapor. How much is the work done during this process? How much is the heat transfer into the system?

At the exit from the first stage nozzles the steam velocity : At the exit from the first stage nozzles the steam velocity is 244 m/s, specific volume 0.0686 m3 /kg, mean diameter 762 mm and steam angle 76o measured from the axial direction. Determine the nozzle height of this stage.

Determine the rate of steam flow : A 20 MW back-pressure steam turbine receives steam at stagnation pressure of 4 MPa and stagnation temperature of 300oC, exhausting from the last stage at stagnation pressure of 0.35 MPa. The turbine isentropic efficiency is 0.884, and mechanical loss..

Determine the initial temperature of the h2o : Rigid steel tank with a volume of 1 m3 contains 2 kg of H2O initially at 400 kPa. Determine the initial temperature of the H2O

Determine the initial temperature : A frictionless piston-cylinder contains 3.0 kg of H2O and is initially at 300 kPa. The initial volume is 1.0 m3. The water is heated until the temperature is 300 C. If the volume within the system reaches 1.5 m3, the piston hits a set of stops and is..

Find the damping coefficient : A 90 kg pilot ejects from a plane and reaches a steady state velocity of 30 m/s with one parachute open. Neglect any air drag force on the pilot and assume that the air drag force can be modeled as an ideal damper i.e. linearly proportional to the ve..

Closed systems-control volume systems-transient systems : Explain whether the following situations and should be modeled as closed systems, control volume systems, or transient systems. Convert the following temperatures to °F, °C, K, R (4 pts) a. 98.6 °F b. 298 K c. 5715 °F e. 100 °C. Convert the following..

A piston-cylinder device initially contains : A piston-cylinder device initially contains 0.4 m3 of air at 100 kPa and 80Â°C.The air is now compressed to 0.1 m3 in such a way that the temperature inside the cylinder remains constant. Determine the work done during this process.

User Account

All Pages