Determine the initial and final temperatures

Assignment Help Civil Engineering

Reference no: EM13543410

A mass of 5 kg of saturated liquid-vapor mixture of water is contained in a piston-cylinder device at 125 kPa. Initially, 2 kg of the water is in the liquid phase and the rest is in the vapor phase. Heat is now transferred to the water, and the piston, which is resting on a set of stops, starts moving when the pressure inside reaches 300 kPa . Heat transfer continues until the total volume increases by 20 percent. Determine

(a) the initial and final temperatures,

(b) the mass of liquid water when the piston first start moving, and

Reference no: EM13543410

Questions Cloud

Compute the horizontal and vertical forces on the curved : The contractor ran out of gunite mixture and finished the deep corner of a 5-m-wide swimming pool, with a quarter circle pipe of PVC pipe, . compute the horizontal and vertical forces on the curved panel AB.

Determine the tensile stress developed in member ab due : Air at 90 psia and 70 degrees F flows through a 4.5 inch diameter welded steel pipe (e = 0.00015) at 60 lb/min. Find the friction head loss and pressure drop in 200 ft of this pipe. Assume the air to be of constant density.

Determine the maximum tensile and compressive bending stress : A rectangular tube has an outside dimensions that are 2in wide and 4in deep and a wall thickness of 0.25in. The tube is acted on by a bending moment of 12,000lb-in. A.)Determine the maximum tensile and compressive bending stresses.

Explain the difference between materials considered to have : Explain the difference between materials considered to have “homogeneous” and “isotropic” material properties. Give examples of materials that are considered isotropic but not homogeneous and others that are considered homogeneous and anisotropic.

Determine the initial and final temperatures : A mass of 5 kg of saturated liquid-vapor mixture of water is contained in a piston-cylinder device at 125 kPa. Initially, 2 kg of the water is in the liquid phase and the rest is in the vapor phase

Determine the heat loss or gain during this process : A piston-cylinder device contains helium gas initially at 150 kPa, 20 degrees C, and 0.5 m^3. The helium is now compressed in a polytropic process (PV^n = constant) to 400 kPa and 140 degrees C. Determine the heat loss or gain during this process.

What is the magnitude and direction of the resultant force : Water under a gage pressure of 350kPa flows with a velocity of 5 m/s through a right-angled bend that has a uniform diameter of 250 mm

What would be the resultant force on the plate : A 40-mm-diameter jet has a velocity of 25 m/s. If this jet were to strike a large flat plate normally, what would be the resultant force on the plate?

Determine at that instant the radial and transverse compont : 1.5-kg collar is attached to a spring and slides without friction along a circular rod in a vertical plane. Knowing that the tension in the spring is70 N and the speed of the collar is 3.8 m/s as it passes through point A,

User Account

All Pages